Lenticular HID Bi-Xenon Mini Projector H1 H7 H4 Retrofit - Z127

Retrofit Bi-Xenon Lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and an innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of fitting Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to convert them into genuine Xenon headlamps

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT SITS TO THE LENS TIP IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of fitting Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to convert them into genuine Xenon headlamps, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian regulations and should only be carried out on vehicles intended for private circuit/track use.

Top quality on the market, essential for results that do not admit compromises. With precision optics, the lenticular projector Mini H1 6.0 concentrates maximum luminous output directly below the cutoff of the light beam, maximising long-range visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With the projectors you will have the cleanest beam, without glare or annoying dazzle zones even for SUV owners.

Direct fit in most headlamps, extremely simple considering the performance they produce, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, it is possible to fit them, but it is not essential: on your parabolic headlamp you can in fact fit one of our specific Xenon conversion kits that will adapt perfectly to your parabola, projecting a powerful beam on the road. With our Specific Xenon kits you will have an excellent result even on parabolic headlamps for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlamp shell or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a complete Retrofit of your headlamp by installing a Bi-Xenon Lenticular projector inside it, which will allow you to obtain a perfect light beam, instant high beam, and unparalleled aesthetics. Thanks to the Retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for unbeatable performance even compared with original OEM Xenon headlamps.

Installation instructions: Remove the headlamp shells, insert the projector into the parabola fixing it in the lamp housing hole by screwing it by hand with the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the shells with the special Retrofitting silicone. Where necessary, a very small amount of cuts and modifications may be required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to original manufacturer Xenon projectors . Their wide, evenly illuminated light beam remains intense down the road to the outer edges. The Bi-Xenon high beam adds a lot of extra light.

Each projector has been perfectly tested and calibrated to ensure you only get the best visual output.

With the best online reputation for unbeatable products, value for money and customer support, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a bulk order request, our technical staff is here to help!

Mini H1 Projector Features:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: 27mm Hex Aluminium anodised
Parabola adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Clear Optic - Purity 99.7%

Z127