Lenticular HID Bi-Xenon Retrofit Projector H1 H7 H4 - Z125

Retrofit Bi-xenon lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon lenticular projectors inside traditional parabolic headlights to convert them into true Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ATTACHED ON THE WEBSITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlights to convert them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian regulations and should only be carried out on vehicles intended for private circuit/track use.

Top Market Quality, essential for results that admit no compromise. With a precision optic, the lenticular projector Mini H1 6.0 concentrates maximum luminous output directly below the cut-off of the beam, maximising long-range visual performance. The light beam is wide, the light distribution is precise, and visibility is maximised. With these projectors you will have maximum beam clarity, without glare or annoying dazzling zones even for SUV owners.

Direct installation in most headlights, extremely simple relative to the performance they produce, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is parabolic, it is possible to fit them, but it is not essential: on your parabolic headlight you can in fact fit one of our specific Xenon conversion kits which will fit perfectly to your parabola, projecting a powerful roadway beam. With our Specific Xenon kits you will achieve excellent results even on parabolic headlights for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlight cover or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a complete Retrofit of your headlight, installing a Bi-Xenon Lenticular projector inside it, which will allow you to obtain a perfect light beam, instant main beam, and unrivalled aesthetics. Thanks to retrofit projectors it is also possible to equip the headlight with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for unmatched performance even compared to OEM original Xenon headlights.

Installation instructions: Remove the headlight covers, insert the projector into the parabola securing it in the lamp housing hole by hand-tightening with the supplied nut. Check the beam orientation, then fully tighten the nut and reseal the covers with the special Retrofitting silicone. Where necessary, a very small amount of cuts and modifications may be required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to original factory Xenon projectors . Their wide, evenly illuminated beam stays intense across the road to the outer edges. The Bi-xenon main beam adds a lot of extra light.

Each projector has been perfectly tested and calibrated to ensure you have only the best visual output.

With the best online reputation for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need model advice, have a technical question or a large stock request, our technical staff is here to help!

Mini H1 Projector Features:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Closing ring: Hexagonal 27mm Anodised Aluminium
Parabola adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z125