Projector Lens HID Bi-Xenon H1 h7 h4 Retrofit - Z121

Kit Bixenon Lenticular retrofit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new, innovative high-beam system.

H1/H7/H4 2,5 POLLICI LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional reflector headlights to transform them into true Xenon headlights

THE MEASUREMENTS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Direct from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional reflector headlights to transform them into true Xenon headlights, with performance literally on par with original factory units. Unlike the USA, this modification is not permitted for use on public roads under current Italian law and must be carried out only on vehicles intended for private circuit / track use.

Top Quality on the Market, essential for results that do not admit compromises. With a precision optic, the lenticular projector Mini H1 6.0 concentrates maximum luminous output directly below the cut-off of the light beam, maximising long-distance visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With these projectors you will have the cleanest light beam, without glare or annoying dazzling zones even for SUV owners.

Direct installation into most headlights, extremely simple relative to the performance they produce, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is a reflector, they can be fitted, but are not essential: on your reflector headlight you can instead fit one of our specific Xenon conversion kits which will adapt perfectly to your reflector, projecting a powerful road beam. With our Specific Xenon kits you will achieve excellent results even on reflector housings for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlight housing or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can obtain even more with a complete Retrofit of your headlight by installing a Bi-Xenon Lenticular projector inside, which will allow you to achieve a perfect light beam, instant main-beam activation, and unrivalled aesthetics. Thanks to Retrofitting projectors it is also possible to equip the headlight with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for unrivalled performance even compared to original OEM Xenon headlights.

Installation instructions: Remove the headlight covers, insert the projector into the reflector securing it in the lamp mounting hole by hand-threading the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the covers with the special Retrofitting silicone. Where necessary, only a very small amount of cutting and modification is required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to that of original factory Xenon projectors . Their wide, uniformly illuminated beam stays intense all the way to the outer edges. The Bixenon high beam adds a lot of additional light.

Each projector has been tested and calibrated to perfection to ensure you have only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and after-sales service, it is trusted by tuning enthusiasts throughout Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a request for large stocks, our technical staff is here to help you!

Mini H1 Projector Features:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: 27mm Hexagonal in Anodised Aluminium
Reflector adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z121