Lenticular HID Bi-Xenon Retrofit Projector H1 H7 H4 - G143N

Lenticular Bi-Xenon retrofit kit H7 H1 H4 WITH WIRING (Without Control Units)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new, innovative high-beam system.

H1/H7/H42.5-INCH LENS

Retrofitting consists of installing Lenticular Bi-Xenon projectors inside conventional parabolic headlamps to convert them into genuine Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ON THE WEBSITE TOGETHER WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Lenticular Bi-Xenon Projectors for Retrofitting with 2.5" optics for H1. Directly from the United States, retrofitting consists of installing Lenticular Bi-Xenon projectors inside conventional parabolic headlamps to convert them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian regulations and should only be carried out on vehicles intended for private circuit/track use.

Top Quality on the Market, essential for results that allow no compromises. With precision optics, the Mini H1 6.0 lenticular projector concentrates the maximum light output directly below the cut-off line of the beam, maximising long-distance visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With these projectors you will have the cleanest beam, without glare or annoying dazzle zones even for SUV owners.

Direct fit in most headlamps, extremely simple considering the performance they deliver, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, they can be fitted but are not essential: for a parabolic headlamp you can in fact fit one of our specific Xenon conversion kits which will adapt perfectly to your reflector, projecting a powerful beam on the road. With our Specific Xenon kits you will achieve excellent results even on parabolic headlamps for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlamp housing or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a full retrofit of your headlamp by installing a Lenticular Bi-Xenon projector inside, which will allow you to obtain a perfect light beam, instant high beam, and unbeatable aesthetics. Thanks to the retrofitting projectors it is also possible to equip the headlamp with D2S, allowing you to pair the best bulbs on the market (Philips) with our top Xenon ballasts, for unrivalled performance even compared to OEM original Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the reflector by securing it in the lamp mounting hole and hand-tightening it with the supplied nut. Check the beam orientation, then fully tighten the nut and reseal the covers with the special retrofitting silicone. Where necessary, a very small amount of cuts and modifications may be required.

The Xenovision Mini H1 Lenticular Bi-Xenon projectors will have performance literally identical to original manufacturer Xenon projectors. Their wide, evenly illuminated beam remains intense all the way to the outer edges. The Bi-Xenon high beam adds a considerable amount of additional light.Each projector has been perfectly tested and calibrated to ensure you get only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a large stock request, our technical staff is here to help you!

Mini Projector Features

:H1Construction: Mini
6.0 Bi-Xenon (Pair)H1Closing ring: 27mm Hexagonal in anodised aluminium
Reflector adapters: Direct for 27mm,
.H4Lens: 2.5" Crystal Clear - Professional Transparent Optics - 99.7% PurityH7.
Lente: 2.5" Crystal Clear - Professional Transparent Optics - Purity 99.7%

G143N