Lenticular HID Bi-Xenon Projector H1 h7 h4 Retrofit - Z110

Bixenon Lenticular retrofit kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Lenticular Bi-Xenon projectors inside conventional parabolic headlamps to transform them into genuine Xenon headlights

THE MEASUREMENTS ARE SHOWN IN THE PHOTOS ATTACHED ON THE WEBSITE TOGETHER WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Lenticular Bi-Xenon Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Lenticular Bi-Xenon projectors inside conventional parabolic headlamps to transform them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for on-road use under current Italian regulations and should only be carried out on vehicles intended for private circuit / track use.

Highest Quality on the Market, essential for results that admit no compromise. With precision optics, the projector lens Mini H1 6.0 concentrates the maximum light output directly below the beam cut-off point, maximising long-distance visual performance. The light beam is wide, light distribution is precise, and visibility is maximised. With the projectors, you will have the cleanest beam, without glare and annoying dazzle zones even for SUV owners.

Direct fitment in the majority of headlamps, extremely simple relative to the performance they produce, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, it is possible to fit them, but it is not essential: on your parabolic headlamp you can instead fit one of our specific Xenon conversion kits that will perfectly adapt to your reflector, projecting a powerful beam on the road. With our Specific Xenon kits you will achieve excellent results even on parabolic headlamps for halogen bulbs; fitting is extremely simple and non-invasive, and does not require opening the headlamp shell or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a complete Retrofit of your headlamp by installing a Lenticular Bi-Xenon projector inside, which will give you a perfect light beam, instant high beam, and unmatched aesthetics. Thanks to the Retrofitting projectors it is also possible to fit D2S bulbs to the headlamp, allowing you to pair the best bulbs on the market (Philips) with our top Xenon Ballasts, for unbeatable performance even compared to original OEM Xenon headlights.

Installation instructions: Remove the headlamp shells, insert the projector into the reflector securing it in the lamp housing hole by screwing it in by hand with the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the shells with the special Retrofitting silicone. Where necessary, a very small amount of cuts and modifications may be required.

The Xenovision Mini H1 Lenticular Bi-Xenon projectors will have performance literally identical to those of original Xenon projectors from the manufacturer. Their wide, evenly illuminated light beam remains intense all the way to the outer edges. The Bi-Xenon high beam adds a considerable amount of extra light.

Each projector has been tested and calibrated to perfection to ensure you have only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need model advice, have a technical question or a bulk stock request, our technical staff is here to help you!

Mini H1 Projector Features:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: 27mm Hexagonal in Anodised Aluminium
Reflector adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z110