Projector Lens HID Bi-Xenon H1 h7 h4 Retrofit - G136

Retrofit Bixenon Lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative high-beam system.

H1/H7/H4 2,5-INCH LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlights to convert them into genuine Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ON THE WEBSITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlights to convert them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike the USA, this modification is not permitted for road use under current Italian law and should only be carried out on vehicles intended for private circuit/track use.

Top Quality on the Market, essential for results that do not accept compromises. With a precision optic, the projector lens Mini H1 6.0 focuses the maximum light output directly below the cutoff line of the beam, maximising long-distance visual performance. The light beam is wide, the light distribution is precise, and visibility is maximised. With the projectors, you will have the cleanest beam, without glare and annoying dazzling zones even for SUV owners.

Direct installation in most headlights, extremely simple relative to the performance they produce, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is parabolic, it is possible to fit them, but it is not essential: on your parabolic headlight you can in fact mount one of our specific Xenon conversion kits that will perfectly adapt to your parabola, projecting a powerful beam on the road. With our Specific Xenon kits you will achieve excellent results even on parabolic headlights for halogen bulbs; the installation is extremely simple and non-invasive, and does not require opening the headlight housing or structural modifications..
- For tuning enthusiasts, more experienced users and those demanding a perfect result, you can obtain even more with a full Retrofit of your headlight, installing a Bi-Xenon Lenticular projector inside, which will allow you to obtain a perfect light beam, instant dipping/high beam, and unrivalled aesthetics. Thanks to the Retrofitting projectors it is also possible to equip D2S bulbs in the headlight, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for unmatched performance even compared with original OEM Xenon headlights.

Installation instructions: Remove the headlight covers, insert the projector into the parabola fixing it in the lamp housing hole by screwing it by hand with the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the covers with the special Retrofitting silicone. Where necessary, a very small amount of cuts and modifications is required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to those of original Xenon projectors from the manufacturer. Their wide, evenly illuminated beam remains intense all the way to the outer edges. The Bixenon high beam adds considerable extra light.

Each projector has been perfectly tested and calibrated to ensure you have only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need model advice, have a technical question or a large stock request, our technical staff is here to help!

Mini H1 Projector Features:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Retaining ring: Hexagonal 27mm Anodised Aluminium
Parabola adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

G136