Lenticular HID Bi-Xenon Projector H1 H7 H4 Retrofit - 2432-SMAX

Retrofit Bi-xenon lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional reflector headlights to convert them into genuine Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional reflector headlights to convert them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike the USA, this modification is not permitted for use on public roads under current Italian regulations and should only be carried out on vehicles intended for private circuit / track use.

Top quality on the market, indispensable for results that allow no compromises. With precision optics, the Mini H1 6.0 projector concentrates maximum light output directly below the beam cut-off line, maximising long-distance visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With these projectors you will have the cleanest beam, without glare or annoying dazzle zones even for SUV owners.

Direct installation in most headlights, extremely simple relative to the performance they produce, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is a reflector, it is possible to fit them, but it is not essential: on your reflector headlight it is in fact possible to fit one of our specific Xenon conversion kits that will fit your reflector perfectly, projecting a powerful beam on the road. With our Specific Xenon kits you will achieve excellent results even on reflector headlights for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlight cover or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a complete retrofit of your headlight by installing a Bi-Xenon Lenticular projector inside, which will allow you to obtain a perfect light beam, instant dipped/high beam, and unrivalled aesthetics. Thanks to the retrofitting projectors it is also possible to equip the headlight with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for unmatched performance even compared to OEM original Xenon headlights.

Installation instructions: Remove the headlight covers, insert the projector into the reflector securing it in the lamp housing hole by screwing it in by hand with the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the covers with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modifications may be required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to original manufacturer's Xenon projectors . Their broad, uniformly illuminated beam remains intense across the road to the outer edges. The Bi-Xenon high beam adds quite a bit of extra light.

Each projector has been tested and calibrated to perfection to ensure you get only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a large-stock request, our technical staff is here to help!

Mini H1 Projector Features:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: 27mm Hexagonal anodised Aluminium
Adapters for reflectors: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

2432-SMAX