Projector Lens HID Bi-Xenon H1 H7 H4 Retrofit - G129B

Retrofit Bi-xenon lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative high-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon lenticular projectors inside traditional parabolic headlights to convert them into true Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ATTACHED ON THE WEBSITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Direct from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlights to convert them into true Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian legislation and should be carried out only on vehicles intended for private circuit/track use.

Highest quality on the market, essential for results that tolerate no compromises. With precision optics, the projector lens Mini H1 6.0 concentrates maximum light output directly below the beam cutoff, maximising long-distance visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With these projectors you will have the cleanest beam, without glare or annoying dazzle zones even for SUV owners.

Direct fit in most headlights, extremely simple relative to the performance they produce, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is parabolic, it is possible to fit them, but it is not essential: on your parabolic headlight you can in fact fit one of our specific Xenon conversion kits that will adapt perfectly to your parabola, projecting a powerful beam on the road. With our Specific Xenon kits you will have excellent results even on parabolic headlights for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlight shell or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a complete retrofit of your headlight by installing a Bi-Xenon Lenticular projector inside, which will allow you to obtain a perfect light beam, instant high beam, and unparalleled aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlight with D2S lamps, allowing you to pair the best lamps on the market (Philips) with our best Xenon Ballasts, for unbeatable performance even compared to OEM Xenon headlights.

Installation instructions: Remove the headlight shells, insert the projector into the parabola securing it in the lamp housing hole by hand-screwing the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the shells with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modifications may be required.

The Xenovision Mini H1 Bi-Xenon lenticular projectors will have performance literally identical to those of original Xenon projectors from the manufacturer. Their wide, uniformly illuminated light beam stays intense all the way to the outer edges. The Bi-Xenon high beam adds a considerable amount of additional light.

Each projector has been tested and perfectly calibrated to ensure you only get the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a large-stock request, our technical staff is here to help you!

Mini H1 Projector Features:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: 27mm Hexagonal anodised aluminium
Parabola adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

G129B