Projector Lens HID Bi-Xenon H1 H7 H4 Retrofit - Z103

Retrofit Bi-xenon lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative high-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional reflector headlights to transform them into true Xenon headlights

THE MEASUREMENTS ARE SHOWN IN THE PHOTOS ON THE SITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 lamps. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional reflector headlights to transform them into true Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for road use under current Italian regulations and should only be carried out on vehicles intended for private circuit/track use.

Top Quality on the Market, essential for results that allow no compromise. With precision optics, the lenticular projector Mini H1 6.0 concentrates maximum light output directly below the cutoff of the beam, maximising long‑distance visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With the projectors you will have the cleanest beam, without glare or annoying dazzle zones even for SUV owners.

Direct fit in most headlights, extremely simple relative to the performance they deliver, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is reflector type, it is possible to fit them, but it is not essential: on your reflector headlight you can instead fit one of our specific Xenon conversion kits which will adapt perfectly to your reflector, projecting a powerful beam on the road. With our Specific Xenon kits you will achieve excellent results even on reflector headlights for halogen lamps; fitting is extremely simple and non‑invasive, and does not require opening the headlamp housing or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, even more can be achieved with a full Retrofit of your headlight by installing a Bi-Xenon Lenticular projector inside, which will allow you to obtain a perfect light beam, instant high beam, and unbeatable aesthetics. Thanks to the Retrofitting projectors it is also possible to equip the headlight with D2S lamps, allowing you to pair the best lamps on the market (Philips) with our best Xenon Ballasts, for performance unmatched even compared to original OEM Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the reflector fixing it in the lamp mounting hole by hand‑screwing the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the covers with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modification may be required.

The Xenovision Mini H1 Lenticular Bi-Xenon projectors will have performance literally identical to original OEM Xenon projectors . Their wide, evenly illuminated beam remains strong across the road to the outer edges. The Bi‑Xenon high beam adds a lot of extra light.

Each projector has been perfectly tested and calibrated to ensure you have only the best visual output.

With the best online reputation for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. Contact us today with your questions. Whether you need model advice, have a technical question or a large stock request, our technical staff is here to help!

Mini H1 Projector Features:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: Hexagonal 27mm Anodised aluminium
Reflector adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Clear Optic - Purity 99.7%

Z103