Lenticular HID Bi-Xenon Retrofit Projector H1 H7 H4 - G117 WITH INTEGRATED RING

Retrofit Bixenon Lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative high‑beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Lenticular Bi‑Xenon projectors inside traditional reflector headlights to convert them into genuine Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ON THE WEBSITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Lenticular Bi‑Xenon Projectors for Retrofitting with 2.5" optics for H1 lamps. Originating from the United States, Retrofitting consists of installing Lenticular Bi‑Xenon projectors inside traditional reflector headlights to convert them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike the USA, this modification is not permitted for road use under current Italian regulations and should only be performed on vehicles intended for private circuit / track use.

Top Market Quality, essential for uncompromising results. With precision optics, the lenticular projector Mini H1 6.0 focuses maximum light output directly below the cut‑off of the beam, maximising long‑range visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With these projectors you will have a very clean beam, without glare or annoying blinding zones even for SUV owners.

Direct fit in the majority of headlights, extremely simple relative to the performance they deliver, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is reflector type, they can be fitted but are not essential: for reflector headlights you can instead fit one of our specific Xenon conversion kits which will adapt perfectly to your reflector, projecting a powerful road beam. With our Specific Xenon kits you will achieve excellent results even on reflector headlights for halogen lamps; installation is extremely simple and non‑invasive, and does not require opening the headlight cover or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, even more can be achieved with a full Retrofit of your headlight by installing a Lenticular Bi‑Xenon projector inside, which will give you a perfect light beam, instant high‑beam, and unparalleled aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlight with D2S lamps, allowing you to pair top market lamps (Philips) with our best Xenon Ballasts, for unmatched performance even compared to OEM Xenon headlights.

Installation instructions: Remove the headlight covers, insert the projector into the reflector fixing it in the lamp housing hole by screwing it by hand with the supplied nut. Check the beam orientation, then tighten the nut permanently and reseal the covers with the special Retrofitting silicone. Where necessary, only a small amount of cutting and modifications is required.

The Xenovision Mini H1 Lenticular Bi‑Xenon projectors will have performance literally identical to original Xenon projectors from the manufacturer. Their wide, evenly lit beam remains intense along the road up to the outer edges. The Bi‑Xenon high beam adds a substantial amount of additional light.

Each projector has been perfectly tested and calibrated to ensure you get only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. Contact us today with your questions. Whether you need model advice, have a technical question or a bulk order request, our technical staff are here to help!

Mini H1 Projector features:
Construction: Mini H1 6.0 Bi‑Xenon (Pair)
Locking ring: Hexagonal 27mm Anodised Aluminium
Reflector adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

G117 WITH INTEGRATED RING