Lens Projector HID Bi-Xenon H1 h7 h4 Retrofit - COV25 LED INTEGRATED

Retrofit Bixenon Lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to convert them into true Xenon headlights

THE MEASUREMENTS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to transform them into true Xenon headlights, with performance literally on a par with factory originals. Unlike in the USA, this modification is not permitted for road use under current Italian regulations and should only be carried out on vehicles intended for private circuit / track use.

Top Quality on the Market, essential for results that allow no compromises. With a precision optic, the Mini H1 6.0 lenticular projector concentrates maximum light output directly below the cut-off of the beam, maximising long-distance visual performance. The light beam is wide, the light distribution is precise, and visibility is maximised. With the projectors you will have a very clean beam, without glare and annoying dazzling zones even for SUV owners.

Direct installation in most headlamps, extremely simple relative to the performance they produce, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, it is possible to fit them, but it is not essential: on your parabolic headlamp you can instead fit one of our specific Xenon conversion kits that will adapt perfectly to your parabola, projecting a powerful beam on the road. With our Specific Xenon kits you will get excellent results even on parabolic halogen headlamps; fitting is extremely simple and non-invasive, and does not require opening the headlamp cover or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can get even more with a complete Retrofit of your headlamp by installing a Bi-Xenon Lenticular projector inside, which will give you a perfect light beam, instant dipped-to-main switching, and unmatched aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for performance unmatched even compared to OEM original Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the parabola securing it in the lamp housing hole by screwing it in by hand with the supplied nut. Check the orientation of the light beam, then tighten the nut definitively and reseal the covers with the special Retrofitting silicone. Where necessary, only a very small amount of cuts and modifications is required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to that of the manufacturer's original Xenon projectors . Their wide, evenly illuminated beam of light stays strong all the way to the extreme edges. The Bi-xenon main beam adds a lot of extra light.

Each projector has been tested and calibrated to perfection to ensure you get only the best visual performance.

With the best online reputation for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts throughout Italy. We invite you to contact us today with your questions. Whether you need model advice, have a technical question or a large stock request, our technical staff is here to help!

Mini H1 Projector Features:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Retention ring: 27mm Hexagonal anodised Aluminium
Parabola adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Clear Optic - Purity 99.7%

COV25 LED INTEGRATED