Lenticular HID Bi-Xenon Mini Projector H1 H7 H4 Retrofit - Z128

Bixenon lenticular retrofit kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to convert them into genuine Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ON THE WEBSITE TOGETHER WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Direct from the United States, retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to convert them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian regulations and should only be carried out on vehicles intended for private circuit/track use.

Top quality on the market, essential for uncompromising results. With precision optics, the projector Mini H1 6.0 concentrates maximum luminous output directly below the cut-off of the light beam, maximising long-distance visual performance. The beam is wide, light distribution is precise, and visibility is maximised. With these projectors you will have the cleanest beam, without glare or annoying dazzling zones even for SUV owners.

Direct fit in most headlamps, extremely simple relative to the performance they produce, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, they can be fitted but are not essential: in your parabolic headlamp you can in fact fit one of our specific Xenon conversion kits which will adapt perfectly to your parabola, projecting a powerful beam on the road. With our Specific Xenon kits you will get excellent results even on parabolic headlights for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlamp cover or structural modifications..
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a complete retrofit of your headlamp by installing a Bi-Xenon Lenticular projector inside, which will allow you to obtain a perfect light beam, instant dipping, and unmatched aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for unbeatable performance even compared to original OEM Xenon lights.

Installation instructions: Remove the headlamp covers, insert the projector into the parabola securing it in the lamp housing hole by screwing it in by hand with the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the covers with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modifications may be required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to those of original factory Xenon projectors Their wide, evenly illuminated light beam stays intense across the road to the outer edges. The Bi-Xenon dipped beam adds a lot of extra light.

Each projector has been perfectly tested and calibrated to ensure you get only the best visual performance.

With the best reputation online for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts throughout Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a large-stock request, our technical staff is here to help you!

Mini H1 Projector Features:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Retaining ring: 27mm hexagonal anodised aluminium
Parabola adapters: Direct to H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z128