Lenticular HID Bi-Xenon Projector H1 H7 H4 Retrofit - 2428 PANAMERA-LED WHITE YELLOW

Kit Bixenon Lenticular retrofit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new, innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional reflector headlights to turn them into true Xenon headlights

THE MEASUREMENTS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional reflector headlights to turn them into true Xenon headlights, with performance literally on par with factory originals. Unlike the USA, this modification is not permitted for road use under current Italian law and should only be carried out on vehicles intended for private track/circuit use.

Top Quality on the Market, essential for results that admit no compromise. With precision optics, the Mini H1 6.0 lenticular projector concentrates maximum light output directly below the cut-off of the beam, maximising long-distance visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With these projectors, you will have the cleanest beam, without glare or troublesome dazzle zones even for SUV owners.

Direct fit in most headlights, extremely simple relative to the performance they deliver, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is a reflector, they can be fitted, but are not essential: for your reflector headlight you can instead fit one of our specific Xenon conversion kits which will adapt perfectly to your reflector, projecting a powerful road beam. With our Specific Xenon kits you will achieve excellent results even on reflector headlights for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlight housing or structural modifications.
- For tuning enthusiasts, more experienced users and those demanding a perfect result, you can achieve even more with a complete retrofit of your headlight by installing a Bi-Xenon Lenticular projector inside it, which will give you a perfect light beam, instant dipped-to-main beam change, and unmatched aesthetics. With retrofitting projectors it is also possible to equip the headlight with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our top Xenon Ballasts, for performance unmatched even compared to OEM Xenon headlights.

Installation instructions: Remove the headlight covers, insert the projector into the reflector securing it in the lamp housing hole by hand-threading the supplied nut. Check the orientation of the light beam, then tighten the nut definitively and reseal the covers with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modification may be required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to original manufacturer Xenon projectors . Their wide, evenly lit beam stays strong along the road to the outer edges. The Bi-Xenon main beam adds a considerable amount of extra light.

Each projector has been perfectly tested and calibrated to ensure you only get the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts throughout Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a large-stock request, our technical staff are here to help!

Mini H1 Projector Features:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: 27mm Hexagon in anodised Aluminium
Reflector adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

2428 PANAMERA-LED WHITE YELLOW