HID Bi-Xenon 3-inch Lensed Projector Mini Retrofit Top Quality - Z128

Retrofit Bixenon 3" lensed kit H7 H1 H4 WITH WIRING (Without Ballasts)

THE COVERS COMPATIBLE WITH THE 3.0 LENS ARE:

z102 / z104 / z111 / z112 / z114 / z115 / z120 / z129 / z125

- 2 lensed projectors

- 2 covers of your choice among the many models in the images

- installation wiring with relay

To complete the kit you will need 2 xenon ballasts, 2 xenon H1 bulbs and optional LED or CCFL rings to enhance the appearance of the various covers.

Pair of Bi-Xenon Lensed Projectors for Retrofitting with a 3" optic for H1 bulbs. Straight from the United States, Retrofitting consists of installing Bi-Xenon lensed projectors inside traditional parabolic headlights to turn them into true Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for road use under current Italian regulations and should only be performed on vehicles intended for private circuit/track use.

Top quality on the market, essential for uncompromising results. With a precision optic, the Mini H1 6.0 lensed projector concentrates maximum light output directly below the beam cutoff, maximising long-distance visual performance. The light beam is wide, the light distribution is precise, and visibility is maximised. With Xenovision projectors you will have the cleanest light beam, without glare or troublesome dazzle zones even for SUV owners.

Direct installation in most headlights, extremely simple relative to the performance they deliver, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?

- If your headlight is already lensed, you do not need them.

- If your headlight is parabolic, they can be fitted but are not essential: for a parabolic headlight you can instead fit one of our specific Xenon conversion kits which will adapt perfectly to your reflector, projecting a powerful road beam. With our specific Xenon kits you will achieve excellent results even on parabolic halogen headlights; installation is extremely simple and non-invasive, and does not require opening the headlamp housing or structural modifications.

- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a full retrofit of your headlight by installing a Bi-Xenon lensed projector inside, which will give you a perfect light beam, instant dipped-to-main operation, and unmatched aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlight with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our top Xenon ballasts, for performance that can surpass OEM Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the reflector securing it in the bulb holder hole by screwing it in by hand with the supplied nut. Check the beam orientation, then fully tighten the nut and reseal the covers with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modifications may be required.

Xenovision Mini H1 Bi-Xenon lensed projectors will have performance literally identical to original factory Xenon projectors. Their wide, evenly illuminated light beam remains strong across the road to the outer edges. The Bi-Xenon main beam adds a considerable amount of additional light.

Each projector is tested and perfectly calibrated to ensure you get only the best visual performance.

With the best reputation online for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. Contact us today with your questions. Whether you need model advice, have a technical question or a bulk order request, our technical staff is here to help!

Mini H1 Projector Features:

Construction: Mini H1 6.0 Bi-Xenon (Pair)

Retention ring: Hexagonal 27mm anodised aluminium

Reflector adapters: Direct for H4, H7.

Lens: 3" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z128