HID Bi-Xenon 3 pollici Lenticular Projector Mini Retrofit Top Quality - Z131

Retrofit Lenticular Bixenon kit H7 H1 H4 WITH WIRING (Without Ballasts)

THE COVERS COMPATIBLE WITH THE 3.0 LENTICULAR ARE THE FOLLOWING:

z102 / z104 / z111 / z112 / z114 / z115 / z120 / z129 / z125

- 2 lenticulars

- 2 covers of your choice from the many models in the images

- installation wiring with relay

To complete the kit you need 2 xenon ballasts, 2 xenon bulbs H1 and optional LED or CCFL rings to embellish the many covers.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with a 3" optic for H1 bulbs. Directly from the United States, Retro-fitting consists of installing Bi-Xenon Lenticular projectors inside traditional reflector headlights to turn them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike the USA, this modification is not permitted for road use under current Italian regulations and should only be carried out on vehicles intended for private circuit/track use.

Top Quality on the Market, essential for results that allow no compromises. With a precision optic, the Mini H1 6.0 lenticular projector concentrates maximum light output directly below the cut-off line of the beam, maximising long-distance visual performance. The light beam is wide, the light distribution is precise, and visibility is maximised. With Xenovision projectors, you will have the cleanest beam, without glare or annoying dazzling zones even for SUV owners.

Direct installation in most headlights, extremely simple relative to the performance they produce, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?

- If your headlight is already lenticular, you do not need them.

- If your headlight is a reflector, they can be fitted, but are not essential: on your reflector headlight you can in fact fit one of our specific Xenon conversion kits which will adapt perfectly to your reflector, projecting a powerful beam on the road. With our Specific Xenon kits you will achieve excellent results even on reflector headlights for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlight housing or structural modifications.

- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can get even more with a complete Retrofit of your headlight, installing a Bi-Xenon Lenticular projector inside, which will allow you to obtain a perfect light beam, instant dipping, and unmatched aesthetics. Thanks to retrofit projectors it is also possible to equip the headlight with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for unparalleled performance even compared to OEM Xenon headlights.

Installation instructions: Remove the headlight covers, insert the projector into the reflector securing it in the lamp housing hole by hand-tightening it with the supplied nut. Check the beam alignment, then tighten the nut definitively and reseal the covers with the special Retro-fitting silicone. Where necessary, only a very small amount of cutting and modifications is required.

Xenovision Mini H1 Bi-Xenon lenticular projectors will have performance literally identical to those of the manufacturer's original Xenon projectors. Their wide, evenly illuminated light beam stays intense all the way to the outer edges. The Bi-xenon high beam adds a considerable amount of additional light.

Each projector has been tested and perfectly calibrated to ensure you have only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts throughout Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a request for large stocks, our technical staff is here to help you!

Mini H1 Projector Features:

Structure: Mini H1 6.0 Bi-Xenon (Pair)

Closing ring: Hexagonal 27mm Anodised Aluminium

Reflector adapters: Direct for H4, H7.

Lens: 3" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z131