HID Bi-Xenon 3 inch Lensed Projector Mini Retrofit Top Quality - Z102

Lensed Bixenon retrofit kit H7 H1 H4 WITH WIRING (Without Ballasts)

THE COVERS COMPATIBLE WITH THE 3.0 LENS ARE THESE:

z102 / z104 / z111 / z112 / z114 / z115 / z120 / z129 / z125

- 2 lenses

- 2 covers of your choice from the many models in the images

- installation wiring with relay

To complete the kit you will need 2 xenon ballasts, 2 xenon H1 bulbs and optionally LED or CCFL rings to decorate the many covers.

Pair of Bi-Xenon Lensed Projectors for Retrofitting with a 3" optic for H1 bulbs. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lensed projectors inside traditional parabolic headlamps to turn them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian law and should only be performed on vehicles intended for private circuit / track use.

Top quality on the market, essential for uncompromising results. With a precision optic, the Mini H1 6.0 lensed projector concentrates maximum luminous output directly below the beam cut-off point, maximising visual performance at long range. The light beam is wide, the light distribution is precise, and visibility is maximised. With Xenovision projectors, you will have the cleanest beam, without glare and annoying dazzle zones even for SUV owners.

Direct installation in most headlamps, extremely simple relative to the performance they deliver, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?

- If your headlamp is already lensed, you do not need them.

- If your headlamp is parabolic, they can be fitted, but they are not essential: for a parabolic headlamp you can in fact fit our specific Xenon conversion kit which will adapt perfectly to your parabola, projecting a powerful road beam. With our Specific Xenon kits you will obtain excellent results even on parabolic halogen headlamps; installation is extremely simple and non-invasive, and does not require opening the headlamp shell or structural modifications.

- For tuning enthusiasts, more experienced users and those seeking a perfect result, you can achieve even more with a complete retrofit of your headlamp, installing a Bi-Xenon Lensed projector inside, which will allow you to obtain a perfect light beam, instant dipping, and unmatched aesthetics. Thanks to the retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for unmatched performance even compared to OEM original Xenon headlights.

Installation instructions: Remove the headlamp shells, insert the projector into the parabola fixing it in the lamp housing hole by hand-threading the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the shells with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modification may be required.

The Xenovision Mini H1 Bi-Xenon Lensed projectors will have performance literally identical to the manufacturer's original Xenon projectors. Their wide, uniformly illuminated light beam remains intense along the road up to the outer edges. The Bixenon high beam adds a lot of extra light.

Each projector has been perfectly tested and calibrated to ensure you have only the best visual performance.

With the best online reputation for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts throughout Italy. Contact us today with your questions. Whether you need model advice, have a technical question or a bulk stock request, our technical staff is here to help you!

Mini H1 Projector Features:

Construction: Mini H1 6.0 Bi-Xenon (Pair)

Locking ring: Hexagonal 27mm Anodised Aluminium

Parabola adapters: Direct for H4, H7.

Lens: 3" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z102