Pair of 3 Inch LENTICULAR PROJECTORS to Assemble SILVER Retrofit Mini H1

To complete the installation a relay is required h4, an xenon kit with an H1 bulb h1 or an H1 LED kit h1 and a pair of covers of your choice from those available in the dedicated category

Optional: the addition of angel eyes, to be evaluated in size and type depending on the cover you choose

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is a reflector type, they can be fitted but are not essential: on a reflector headlight you can instead fit one of our specific Xenon or LED conversion kits which will adapt perfectly to your reflector, projecting a powerful beam onto the road. With our specific Xenon or LED kits you will achieve excellent results even on reflector headlights designed for halogen bulbs; the installation is extremely simple and non-invasive and does not require opening the headlamp housing or making structural modifications.
- For thetuning enthusiasts, more experienced users and those who demand aperfect result, even more can be achieved with a full Retrofit of your headlight by installing a Bi-Xenon lenticular projector inside, which will allow you to obtain a perfect light beam, instant dipping/bright function and an unrivalled aesthetic.

Installation instructions:Remove the headlamp covers, insert the projector into the reflector by securing it in the lamp housing hole and hand-tightening it with the supplied nut. Check the orientation of the light beam, then fully tighten the nut and seal the covers with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modification may be required.