Lenticular HID Bi-Xenon Retrofit Projector H1 H7 H4 - Z99

Retrofit Bi-Xenon lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative high beam system.

H1/H7/H4 2,5-INCH LENS

Retrofitting consists of installing Bi-Xenon lenticular projectors inside conventional reflector headlights to convert them into true Xenon headlights

THE MEASUREMENTS ARE SHOWN IN THE IMAGES ON THE SITE TOGETHER WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Coming directly from the United States, retrofitting consists of installing Bi-Xenon lenticular projectors inside conventional reflector headlights to convert them into true Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for on-road use under current Italian law and must only be performed on vehicles intended for private circuit/track use.

Top quality on the market, essential for uncompromising results. With precision optics, the Mini H1 6.0 lenticular projector concentrates maximum light output directly below the beam cut-off, maximising long-distance visual performance. The beam is wide, light distribution is precise, and visibility is maximised. With these projectors you will have the cleanest light beam, without glare or annoying dazzle zones even for SUV owners.

Direct fit in most headlights, extremely simple relative to the performance they deliver, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is a reflector, they can be fitted but are not essential: on a reflector headlight you can instead fit one of our specific Xenon conversion kits which will adapt perfectly to your reflector, projecting a powerful road beam. With our Specific Xenon kits you will achieve excellent results even on reflector headlights for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlamp housing or structural modifications..
- For tuning enthusiasts, more experienced users and those demanding a perfect result, you can get even more with a complete retrofit of your headlight by installing a Bi-Xenon lenticular projector inside it, which will give you a perfect light beam, instantaneous high beam, and unmatched aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlight with D2S bulbs, allowing you to match the best bulbs on the market (Philips) with our best Xenon ballasts, for performance that can rival OEM original Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the reflector securing it in the lamp housing hole by screwing it in by hand with the supplied nut. Check the beam orientation, then fully tighten the nut and reseal the covers with the special retrofitting silicone. Where necessary, only a very small amount of cutting and modification is required.

Xenovision Mini H1 Bi-Xenon lenticular projectors will have performance literally identical to that of original Xenon projectors from the manufacturer. Their wide, evenly illuminated light beam stays strong across the road to the outer edges. The Bi-Xenon high beam adds a lot of extra light.

Each projector has been perfectly tested and calibrated to ensure you get only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a bulk stock request, our technical staff is here to help!

Mini H1 Projector specifications:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Retaining ring: 27mm hexagonal, anodised aluminium
Reflector adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Clear Optic - Purity 99.7%

Z99