Lens Projector HID Bi-Xenon H1 H7 H4 Retrofit - Z263

Lenticular Bixenon retrofit kit H7 H1 H4 WITH WIRING (Without Control Units)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new, innovative high-beam system.

H1/H7/H4 2.5-INCH LENS

Retrofitting consists of installing Lenticular Bi-Xenon projectors inside traditional parabolic headlights to convert them into genuine Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Lenticular Bi-Xenon Projectors for Retrofitting with 2.5" optics for H1. Directly from the United States, Retrofitting consists of installing Lenticular Bi-Xenon projectors inside traditional parabolic headlights to convert them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for road use under current Italian regulations and should only be carried out on vehicles intended for private circuit/track use.

Top Quality on the Market, essential for results that allow no compromises. With precision optics, the Mini H1 6.0 lenticular projector concentrates the maximum light output directly below the beam cut-off point, maximising long-distance visual performance. The light beam is wide, the light distribution is precise, and visibility is maximised. With the projectors, you will have the cleanest beam possible, without glare and annoying dazzling areas even for SUV owners.

Direct installation in most headlamps, extremely simple relative to the performance they produce, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is parabolic, it is possible to fit them, but it is not essential: on your parabolic headlight you can in fact fit one of our specific Xenon conversion kits that will fit your reflector perfectly, projecting a powerful road beam. With our Specific Xenon kits you will achieve an excellent result even on parabolic headlights for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlamp cover or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a full Retrofit of your headlamp, installing a Lenticular Bi-Xenon projector inside, which will allow you to obtain a perfect light beam, instant high beam, and unmatched aesthetics. Thanks to the Retrofitting projectors it is also possible to equip the headlamp with D2S, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for performances unmatched even compared to original OEM Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the reflector securing it in the lamp housing hole by hand-threading the supplied nut. Check the beam orientation, then fully tighten the nut and reseal the covers with the special Retrofitting silicone. Where necessary, only a very small amount of cutting and modifications will be required.

The Xenovision Mini H1 Lenticular Bi-Xenon projectors will have performance literally identical to that of the manufacturer's original Xenon projectors. Their wide, evenly illuminated light beam remains intense across the road up to the outer edges. The Bi-Xenon high beam adds a significant amount of additional light.Each projector has been tested and perfectly calibrated to ensure you only get the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a large stock request, our technical staff is here to help!

Mini Projector Features

Mini H1:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: Hexagonal 27mm in anodised aluminium
Adaptors for reflectors: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - 99.7% Purity

Z263