Projector Lens HID Bi-Xenon H1 H7 H4 Retrofit - Z260B

Bixenon Lenticular retrofit kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to transform them into true Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ON THE WEBSITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Direct from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to transform them into true Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian law and should only be carried out on vehicles intended for private circuit/track use.

Top Market Quality, essential for results that do not admit compromises. With precision optics, the lenticular projector Mini H1 6.0 concentrates maximum light output directly below the beam cut-off point, maximising visible range at long distance. The beam is wide, light distribution is precise, and visibility is maximised. With these projectors, you will have a very clean beam, without glare or annoying dazzle even for SUV owners.

Direct installation in most headlamps, extremely simple relative to the performance they produce, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, they can be fitted but are not essential: for a parabolic headlamp you can instead fit one of our specific Xenon conversion kits that will adapt perfectly to your parabola, projecting a powerful road beam. With our Specific Xenon kits you will achieve excellent results even on parabolic halogen headlamps; installation is extremely simple and non-invasive, and does not require opening the headlamp housing or structural modifications.
- For tuning enthusiasts, more experienced users and those demanding a perfect result, you can get even more with a full Retrofit of your headlamp by installing a Bi-Xenon Lenticular projector, which will give you a perfect light beam, instant high beam, and unrivalled aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for unmatched performance even compared to OEM Xenon headlamps.

Installation instructions: Remove the headlamp covers, insert the projector into the parabola, securing it in the lamp mounting hole by hand-tightening the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the covers with the special silicone for Retrofitting. Where necessary, only a very small amount of cutting and modification is required.

The Xenovision Mini H1 Lenticular Bi-Xenon projectors will have performance literally identical to original manufacturer Xenon projectors . Their wide, evenly illuminated light beam stays intense along the road up to the outer edges. The Bi-Xenon high beam adds a lot of extra light.

Each projector has been perfectly tested and calibrated to ensure you get only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts throughout Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a bulk order request, our technical staff is here to help!

Mini H1 Projector Specifications:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Retaining ring: Hexagonal 27mm Anodised Aluminium
Parabola adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z260B