Lenticular HID Bi-Xenon Retrofit Projector H1 H7 H4 - Z260

Retrofit Bi-Xenon lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5-INCH LENS

Retrofitting consists of fitting Bi-Xenon Lenticular projectors inside traditional reflector headlamps to convert them into genuine Xenon headlights

MEASUREMENTS ARE SHOWN IN THE PHOTOS ON THE SITE ALONG WITH ALL THE DIMENSIONS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of fitting Bi-Xenon Lenticular projectors inside traditional reflector headlamps to convert them into genuine Xenon headlights, delivering performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for road use under current Italian regulations and should only be carried out on vehicles intended for private circuit/track use.

Top quality on the market, essential for results that admit no compromises. With precision optics, the lenticular projector Mini H1 6.0 focuses maximum light output directly below the beam cut-off line, maximising visual performance at long range. The beam is wide, light distribution is precise, and visibility is maximised. With these projectors you will have the cleanest beam, without glare or annoying dazzling areas even for SUV owners.

Direct fit in most headlamps, extremely simple relative to the performance they deliver, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is reflector-type, they can be fitted but are not essential: for reflector headlamps you can instead fit one of our specific Xenon conversion kits which will adapt perfectly to your reflector, projecting a powerful road beam. With our Specific Xenon kits you will achieve excellent results even on reflector headlamps for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlamp housing or structural modifications..
- For tuning enthusiasts, more experienced users and those who demand a perfect result, even more can be achieved with a full Retrofit of your headlamp by installing a Bi-Xenon Lenticular projector inside, allowing you to obtain a perfect light beam, instant dipped-to-main beam operation, and unmatched aesthetics. Thanks to Retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the market's best bulbs (Philips) with our top Xenon Ballasts, for unrivalled performance even compared to OEM Xenon headlamps.

Installation instructions: Remove the headlamp covers, insert the projector into the reflector securing it in the lamp housing hole by hand-tightening with the supplied nut. Check beam orientation, then fully tighten the nut and reseal the covers with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modification may be required.

The Xenovision Mini H1 Lenticular Bi-Xenon projectors will have performance literally identical to original manufacturer Xenon projectors . Their wide, evenly illuminated light beam remains strong across the road to the outer edges. The Bi-Xenon main beam adds a substantial amount of extra light.

Each projector has been perfectly tested and calibrated to ensure you only get the best visual performance.

With the best online reputation for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts throughout Italy. Contact us today with your questions. Whether you need advice on the model, have a technical question or a large stock request, our technical staff is here to help!

Mini H1 Projector features:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: 27mm hexagonal anodised aluminium
Reflector adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z260