Lens Projector HID Bi-Xenon H1 h7 h4 Retrofit - Z232

Retrofit Bi-Xenon lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon lenticular projectors inside traditional parabolic headlamps to convert them into genuine Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ON THE SITE TOGETHER WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, retrofitting consists of installing Bi-Xenon lenticular projectors inside traditional parabolic headlamps to convert them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike the USA, this modification is not permitted for use on public roads under current Italian regulations and should only be carried out on vehicles intended for private circuit/track use.

Top Quality on the Market, essential for results that do not allow compromises. With a precision optic, the Mini H1 6.0 lenticular projector concentrates the maximum luminous output directly below the cut-off of the light beam, maximising long-distance visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With the projectors, you will have the cleanest beam, without glare and annoying dazzle zones even for SUV owners.

Direct fit in most headlamps, extremely simple relative to the performance they produce, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, it is possible to fit them, but it is not essential: on your parabolic headlamp you can in fact fit one of our specific Xenon conversion kits which will adapt perfectly to your parabola, projecting a powerful light beam on the road. With our Specific Xenon kits you will achieve excellent results even on parabolic halogen headlamps, the fitting is extremely simple and non-invasive, and does not require opening the headlamp housing or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a complete retrofit of your headlamp, installing a Bi-Xenon Lenticular projector inside it, which will allow you to obtain a perfect light beam, instant high beam, and unmatched aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for unmatched performance even compared to original OEM Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the parabola by securing it in the lamp housing hole by hand-tightening with the supplied nut. Check the beam orientation, then tighten the nut permanently and reseal the covers with the special Retrofitting silicone. Where necessary, a very small amount of cuts and modifications is required.

The Xenovision Mini H1 Bi-Xenon lenticular projectors will have performance literally identical to original manufacturer's Xenon projectors . Their wide, evenly illuminated beam remains intense all the way to the outer edges. The Bi-Xenon high beam adds considerable additional light.

Each projector has been perfectly tested and calibrated to ensure you only get the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts throughout Italy. We invite you to contact us today with your questions. Whether you need model advice, have a technical question or a large stock request, our technical staff is here to help!

Mini H1 Projector Features:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: 27mm Hexagonal Anodised Aluminium
Adapters for parabolas: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z232