Projector Lens HID Bi-Xenon H1 H7 H4 Retrofit - Z231

Retrofit Bi-Xenon Lenticular Kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new, innovative high-beam system.

H1/H7/H4 2.5-INCH LENS

Retrofitting involves installing Bi-Xenon lenticular projectors inside traditional parabolic headlamps to convert them into true Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ON THE WEBSITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR PROJECTOR FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1. Directly from the United States, retrofitting involves installing Bi-Xenon lenticular projectors inside traditional parabolic headlamps to convert them into true Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian regulations and should only be carried out on vehicles intended for private circuit/track use.

Top Market Quality, essential for results that allow no compromises. With precision optics, the Mini H1 6.0 lenticular projector concentrates maximum light output directly below the beam cut-off line, maximising long-distance visual performance. The light beam is wide, the light distribution is precise, and visibility is maximised. With these projectors you will have the cleanest light beam, without glare or annoying dazzle zones, even for SUV owners.

Direct fitment into most headlamps; extremely simple relative to the performance they deliver, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, they can be fitted but are not essential: on your parabolic headlamp you can in fact fit one of our specific Xenon conversion kits that will adapt perfectly to your reflector, projecting a powerful beam on the road. With our specific Xenon kits you will achieve excellent results even on parabolic halogen reflectors; installation is extremely simple and non-invasive, and does not require opening the headlamp shell or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a complete retrofit of your headlamp by installing a Bi-Xenon lenticular projector inside it, which will allow you to obtain a perfect light beam, instant high beam, and unrivalled aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlamp with D2S, allowing you to pair the best bulbs on the market (Philips) with our top Xenon ballasts for performance that is unbeatable even compared with OEM original Xenon headlights.

Installation instructions: Remove the headlamp shells, insert the projector into the reflector securing it in the lamp housing hole by hand-threading the supplied nut. Check the beam orientation, then tighten the nut fully and reseal the shells with the special retrofitting silicone. Where necessary, a very small amount of cutting and modification may be required.

The Xenovision Mini H1 Bi-Xenon lenticular projectors will have performance literally identical to original factory Xenon projectors. Their wide, evenly illuminated light beam stays intense all the way to the outer edges. The Bi-Xenon high beam adds a considerable amount of additional light.of the house. Their wide, uniformly illuminated beam of light stays intense all the way down the road to the outer edges. The Bixenon High Beam adds a considerable amount of additional light.

Each projector has been tested and perfectly calibrated to ensure you receive only the best visual performance.

With the best online reputation for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or require a large stock order, our technical staff are here to help!

Mini Projector Features H1:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: Hexagonal 27mm in anodised aluminium
Reflector adapters: Direct fit for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - 99.7% Purity

Z231