HID Bi-Xenon Lenticular Projector H1 H7 H4 Retrofit - Z229

Lenticular Bi-Xenon retrofit kitH7 H1 H4WITH WIRING (Without control units)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new, innovative high-beam system.

H1/H7/H42.5-INCH LENS

Retrofitting consists of installing lenticular Bi-Xenon projectors inside traditional parabolic headlamps to convert them into genuine Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ATTACHED ON THE WEBSITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Lenticular Bi-Xenon Projectors for Retrofitting with 2.5" optics for H1. Directly from the United States, retrofitting consists of installing lenticular Bi-Xenon projectors inside traditional parabolic headlamps to convert them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian law and should only be carried out on vehicles intended for private circuit/track use.

Top Quality on the Market, essential for results that allow no compromises. With a precision optic, the lenticular projector Mini H1 6.0 concentrates the maximum light output directly below the beam cut-off, maximising long-distance visual performance. The light beam is wide, the light distribution is precise, and visibility is maximised. With the projectors, you will have the cleanest beam possible, without glare or annoying dazzle zones even for SUV owners.

Direct installation in most headlamps, extremely simple given the performance they produce, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, they can be fitted but are not essential: on your parabolic headlamp you can instead fit one of our specific Xenon conversion kits that will adapt perfectly to your parabola, projecting a powerful light beam on the road. With our specific Xenon kits you will get excellent results even on parabolic headlamps originally for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlamp cover or structural modifications.
- For thetuning enthusiasts, more experienced users and those who demand aperfect result, you can achieve even more with a complete retrofit of your headlamp by installing a lenticular Bi-Xenon projector inside, which will allow you to obtain a perfect light beam, instant high-beam, and unmatched aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlamp with D2S, allowing you to match the best bulbs on the market (Philips) with our best Xenon ballasts, for unbeatable performance even compared with original OEM Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the parabola securing it in the lamp housing hole by hand-tightening the supplied nut. Check the orientation of the light beam, then fully tighten the nut and reseal the covers with the special retrofitting silicone. Where necessary, a very small amount of cutting and modification may be required.

The Xenovision Mini H1 lenticular Bi-Xenon projectors will have performance literally identical to original brand Xenon projectors. Their wide, evenly illuminated light beam stays intense across the road up to the outer edges. The Bi-Xenon high beam adds a considerable amount of additional light.Each projector has been perfectly tested and calibrated to ensure you get only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a large stock request, our technical staff is here to help!

Mini Projector Features

Mini H1:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Closing ring: 27mm hexagonal in anodised aluminium27mm in anodised aluminium
Adapters for parabolas: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - 99.7% Purity

Z229