Lenticular HID Bi-Xenon Projector Mini H1 H7 H4 Retrofit - Z131

Bixenon Lenticular retrofit kit H7 H1 H4 WITH WIRING (Without Ballasts)

A LENTICULAR BI-XENON PROJECTOR KIT with a new design to improve illumination depth and a new innovative high-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Lenticular Bi-Xenon projectors inside traditional parabolic headlamps to convert them into genuine Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE TOGETHER WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Lenticular Bi-Xenon Projectors for Retrofitting with a 2.5" optic for H1 bulbs. Direct from the United States, Retrofitting consists of installing Lenticular Bi-Xenon projectors into traditional parabolic headlamps to convert them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian law and should only be performed on vehicles intended for private circuit/track use.

Top Quality on the Market, essential for results that allow no compromises. With a precision optic, the projector lens Mini H1 6.0 focuses the maximum light output directly below the beam cut-off, maximising long-distance visual performance. The light beam is wide, the light distribution is precise, and visibility is maximised. With these projectors, you will have the cleanest light beam, without glare or annoying dazzle zones even for SUV owners.

Direct installation in most headlamps, extremely simple relative to the performance they deliver, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, they can be fitted, but are not essential: for your parabolic headlamp you can in fact fit one of our specific Xenon conversion kits that will adapt perfectly to your parabola, projecting a powerful road beam. With our Specific Xenon kits you will achieve excellent results even on parabolic halogen headlamps; installation is extremely simple and non-invasive, and does not require opening the headlamp housing or structural modifications.
- For tuning enthusiasts, more experienced users and those demanding a perfect result, even more can be achieved with a complete retrofit of your headlamp by installing a Lenticular Bi-Xenon projector inside, which will allow you to obtain a perfect light beam, instant high beam, and unrivalled aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the market's best bulbs (Philips) with our best Xenon Ballasts, for unmatched performance even compared with OEM original Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the parabola securing it in the lamp housing hole by hand-tightening with the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the covers with the special Retroffiting silicone. Where necessary, a very small amount of cuts and modifications may be required.

The Lenticular Bi-Xenon Xenovision Mini H1 projectors will have performance literally identical to original Xenon projectors from the manufacturer. Their wide, evenly illuminated light beam remains intense all the way to the outer edges. The Bi-Xenon high beam adds a considerable amount of additional light.

Each projector has been perfectly tested and calibrated to ensure you only get the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need model advice, have a technical question or a large stock request, our technical staff is here to help you!

Mini H1 Projector Features:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: 27mm hexagonal anodised aluminium
Parabola adapters: Direct to H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z131