Projector Lens HID Bi-Xenon H1 h7 h4 Retrofit - Z130

Retrofit Bi-xenon lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlights to transform them into true Xenon headlights

THE MEASUREMENTS ARE SHOWN IN THE PHOTOS ON THE SITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlights to transform them into true Xenon headlights, with performance literally on par with factory originals. Unlike the USA, this modification is not permitted for road use under current Italian regulations and should only be carried out on vehicles intended for private circuit/track use.

Top Quality on the Market, essential for results that do not admit compromises. With precision optics, the Mini H1 6.0 lenticular projector concentrates maximum light output directly below the beam cut-off, maximising long-distance visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With these projectors you will have the cleanest beam, without glare or annoying dazzle zones even for SUV owners.

Direct fit in most headlights, extremely simple relative to the performance they produce, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is parabolic, it is possible to fit them, but it is not essential: on your parabolic headlight you can in fact fit one of our specific Xenon conversion kits that will adapt perfectly to your parabola, projecting a powerful beam on the road. With our Specific Xenon kits you will achieve excellent results even on parabolic headlights for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlamp bowl or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, even more can be achieved with a complete retrofit of your headlamp by installing a Bi-Xenon Lenticular projector inside, which will allow you to obtain a perfect light beam, instant dipped-to- main beam, and unrivalled aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for unrivalled performance even compared to original OEM Xenon headlights.

Installation instructions: Remove the headlamp bowls, insert the projector into the parabola by securing it in the lamp housing hole by screwing it in by hand with the supplied nut. Check the orientation of the beam, then fully tighten the nut and reseal the bowls with the special Retrofitting silicone. Where necessary, only a very small amount of cutting and modifications is required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to those of original Xenon projectors from the manufacturer. Their wide, uniformly illuminated beam remains strong all the way to the outer edges. The Bi-xenon main beam adds a lot of additional light.

Each projector has been perfectly tested and calibrated to ensure you have only the best visual performance.

With the best online reputation for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a large stock request, our technical staff is here to help you!

Mini H1 Projector Features:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Closing ring: 27mm hexagonal in anodised aluminium
Parabola adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z130