Lenticular HID Bi-Xenon Projector H1 H7 H4 Retrofit - Z120

Bixenon Lenticular retrofit kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5-INCH LENS

Retrofitting consists of installing Lenticular Bi-Xenon projectors inside traditional reflector headlights to convert them into genuine Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ON THE SITE TOGETHER WITH ALL THE DIMENSIONS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Lenticular Bi-Xenon Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Lenticular Bi-Xenon projectors inside traditional reflector headlights to convert them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian regulations and must only be carried out on vehicles intended for private circuit/track use.

Highest Quality on the Market, essential for uncompromising results. With precision optics, the Mini H1 6.0 lenticular projector concentrates the maximum light output directly below the cut-off of the beam, maximising long-range visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With the projectors, you will have the cleanest beam, without glare and annoying dazzle zones even for SUV owners.

Direct installation in most headlights, extremely simple relative to the performance they produce, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is a reflector, they can be fitted, but they are not essential: on your reflector headlight you can in fact fit one of our specific Xenon conversion kits which will adapt perfectly to your reflector, projecting a powerful road beam. With our Specific Xenon kits you will obtain excellent results even on reflector headlights for halogen bulbs; fitting is extremely simple and non-invasive, and does not require opening the headlamp housing or structural modifications..
- For tuning enthusiasts, more experienced users and those demanding a perfect result, you can achieve even more with a full retrofit of your headlight by installing a Lenticular Bi-Xenon projector inside, which will give you a perfect light beam, instant dipped-to-main switching, and unparalleled aesthetics. Thanks to the retrofitting projectors it is also possible to equip the headlight with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for performance unmatched even compared to OEM original Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector inside the reflector fixing it in the lamp housing hole by hand-tightening the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the covers with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modifications may be required.

The Xenovision Mini H1 Lenticular Bi-Xenon projectors will have performance literally identical to those of original Xenon projectors from the manufacturer. Their wide, evenly illuminated light beam remains intense across the road to the outer edges. The Bi-Xenon main beam adds a lot of extra light.

Each projector has been perfectly tested and calibrated to ensure you get only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need model advice, have a technical question or a large stock request, our technical staff is here to help you!

Mini H1 Projector Features:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Closure ring: 27mm Hexagonal anodised Aluminium
Reflector adapters: Direct to H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z120