Lenticular HID Bi-Xenon Projector H1 h7 h4 Retrofit - Z119

Retrofit Bi-xenon lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and an innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon lenticular projectors inside traditional parabolic headlamps to convert them into true Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Bi-Xenon lenticular projectors inside traditional parabolic headlamps to convert them into true Xenon headlights, with performance literally on par with original factory units. Unlike the USA, this modification is not permitted for road use under current Italian regulations and should only be performed on vehicles intended for private circuit / track use.

Top Quality on the Market, essential for results that allow no compromises. With precision optics, the Mini H1 6.0 lenticular projector concentrates the maximum light output directly below the cutoff line of the beam, maximising long-range visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With these projectors you will have an exceptionally clean beam, without glare or annoying dazzle zones even for SUV owners.

Direct installation in the majority of headlamps, extremely simple relative to the performance they produce, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, it is possible to fit them, but it is not essential: on your parabolic headlamp you can in fact fit one of our specific Xenon conversion kits which will adapt perfectly to your parabola, projecting a powerful beam on the road. With our Specific Xenon kits you will achieve excellent results even on parabolic headlamps for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlamp housing or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a complete retrofit of your headlamp by installing a Bi-Xenon Lenticular projector inside, which will give you a perfect light beam, instant high beam, and unbeatable aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our top Xenon Ballasts, for performance unmatched even compared to original OEM Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the parabola securing it in the lamp housing hole by hand-threading the supplied nut. Check the beam orientation, then fully tighten the nut and reseal the covers with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modification may be required.

The Xenovision Mini H1 Bi-Xenon lenticular projectors will deliver performance literally identical to original factory Xenon projectors . Their wide, evenly illuminated beam stays strong across the road to the outer edges. The Bi-xenon high beam adds a considerable amount of extra light.

Each projector has been perfectly tested and calibrated to ensure you only get the best visual performance.

With the best reputation online for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. Contact us today with your questions. Whether you need advice on the model, have a technical question or a large-stock request, our technical staff is here to help!

Mini H1 Projector Features:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Closure ring: 27mm hex aluminium anodised
Parabola adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z119