Projector Lens HID Bi-Xenon H1 H7 H4 Retrofit - Z117

Bixenon Lenticular retrofit kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Lenticular Bi-Xenon projectors inside traditional parabolic headlamps to turn them into true Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENS FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Lenticular Bi-Xenon Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Lenticular Bi-Xenon projectors inside traditional parabolic headlamps to turn them into true Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for road use under current Italian regulations and should be performed only on vehicles intended for private circuit / track use.

Top Quality on the Market, essential for results that allow no compromises. With precision optics, the Mini H1 6.0 lenticular projector concentrates maximum light output directly below the cut-off of the light beam, maximising long-distance visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With these projectors, you will have the cleanest beam, without glare and annoying dazzle zones even for SUV owners.

Direct fit in most headlamps; extremely simple considering the performance they produce, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, it is possible to fit them, but it is not essential: for a parabolic headlamp you can in fact fit one of our specific Xenon conversion kits that will adapt perfectly to your parabola, projecting a powerful beam on the road. With our Specific Xenon kits you will obtain excellent results even on parabolic halogen headlamps; installation is extremely simple and non-invasive, and does not require opening the headlamp shell or structural modifications..
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a complete Retrofit of your headlamp by installing a Lenticular Bi-Xenon projector inside, which will allow you to obtain a perfect light beam, instant high beam, and unrivalled aesthetics. Thanks to the Retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for unmatched performance even compared to OEM original Xenon headlights.

Installation instructions: Remove the headlamp shells, insert the projector into the parabola securing it in the lamp housing hole by screwing it in by hand with the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the shells with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modifications may be required.

The Xenovision Mini H1 Lenticular Bi-Xenon projectors will have performance literally identical to those of original factory Xenon projectors . Their wide, evenly illuminated light beam remains intense all the way to the outer edges. The Bi-Xenon high beam adds a considerable amount of extra light.

Each projector has been tested and perfectly calibrated to ensure you have only the best visual performance.

With the best online reputation for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts throughout Italy. We invite you to contact us today with your questions. Whether you need model advice, have a technical question or a large stock request, our technical staff is here to help you!

Mini H1 Projector specifications:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: Hexagonal 27mm anodised aluminium
Parabola adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Clear Optic - Purity 99.7%

Z117