Lenticular HID Bi-Xenon Retrofit Projector H1 H7 H4 - Z116

Retrofit Bixenon Lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of fitting Lenticular Bi-Xenon projectors inside traditional parabolic headlamps to convert them into true Xenon headlamps

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE ALONG WITH ALL THE DIMENSIONS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Lenticular Bi-Xenon Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of fitting Lenticular Bi-Xenon projectors inside traditional parabolic headlamps to convert them into true Xenon headlamps, with performance literally comparable to factory originals. Unlike in the USA, this modification is not permitted for road use under current Italian regulations and should only be carried out on vehicles intended for private circuit / track use.

Top Quality on the Market, essential for results that do not allow compromises. With a precision optic, the projector Mini H1 6.0 focuses the maximum luminous output directly below the cut-off of the light beam, maximising long-distance visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With these projectors you will have a very clean light beam, without glare or annoying dazzle zones even for SUV owners.

Direct installation in the majority of headlamps, extremely simple relative to the performance they produce, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, it is possible to fit them, but it is not essential: for your parabolic headlamp you can instead fit one of our specific Xenon conversion kits which will adapt perfectly to your parabola, projecting a powerful light beam on the road. With our Specific Xenon kits you will obtain excellent results even on parabolic halogen headlamps; installation is extremely simple and non-invasive, and does not require opening the headlamp cover or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, even more can be achieved with a full retrofit of your headlamp by fitting a Lenticular Bi-Xenon projector inside, which will provide a perfect light beam, instant dipped/high beam switching, and unrivalled aesthetics. Thanks to the retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for performance unmatched even compared to original OEM Xenon headlamps.

Installation instructions: Remove the headlamp covers, insert the projector inside the parabola fixing it in the lamp housing hole by hand-tightening with the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the covers with the special Retrofitting silicone. Where necessary, only a minimal amount of cuts and modifications will be required.

The Xenovision Mini H1 Lenticular Bi-Xenon projectors will have performance literally identical to those of original manufacturer Xenon projectors . Their wide, evenly illuminated light beam remains intense along the road up to the outer edges. The Bi-Xenon passing beam adds a considerable amount of additional light.

Each projector has been perfectly tested and calibrated to ensure you only get the best visual performance.

With the best reputation online for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a request for large stocks, our technical staff is here to help you!

Mini H1 Projector characteristics:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Closure ring: Hexagonal 27mm Anodised Aluminium
Adapters for parabolas: Direct to H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z116