Lenticular HID Bi-Xenon Projector H1 H7 H4 Retrofit - Z115

Bixenon Lenticular retrofit kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative high-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional reflector headlights to convert them into genuine Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional reflector headlights to turn them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian legislation and should only be carried out on vehicles intended for private circuit/track use.

Top market quality, essential for results that admit no compromises. With precision optics, the Mini H1 6.0 lenticular projector concentrates maximum light output directly below the cut-off line of the beam, maximising long-distance visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With the projectors you will have a very clean light beam, without glare and annoying dazzling zones even for SUV owners.

Direct installation in most headlights; extremely simple relative to the performance they produce, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is a reflector, it is possible to fit them, but it is not essential: on your reflector headlight you can in fact fit one of our specific Xenon conversion kits that will adapt perfectly to your reflector, projecting a powerful road beam. With our Specific Xenon kits you will achieve excellent results even on reflector headlights for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlamp cover or structural modifications..
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a full retrofit of your headlight by installing a Bi-Xenon Lenticular projector inside, which will allow you to obtain a perfect light beam, instant high beam, and unmatched aesthetics. Thanks to the retrofitting projectors it is also possible to equip the headlight with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for unrivalled performance even compared to OEM original Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the reflector fixing it in the lamp housing hole by screwing it in by hand with the supplied nut. Check the orientation of the light beam, then tighten the nut definitively and reseal the covers with the special silicone for Retrofitting. Where necessary, a very small amount of cuts and modifications may be required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to those of original Xenon projectors from the manufacturer. Their wide, evenly illuminated light beam remains intense all the way to the outer edges. The Bi-Xenon high beam adds a lot of additional light.

Each projector has been tested and perfectly calibrated to ensure you have only the best visual performance.

With the best online reputation for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a bulk order request, our technical staff is here to help you!

Mini H1 projector features:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Retention ring: Hexagonal 27mm anodised aluminium
Reflector adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z115