Lenticular HID Bi-Xenon Projector H1 h7 h4 Retrofit - Z113

Retrofit Bixenon Lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 POLLICE LENS

Retrofitting involves installing Bi-Xenon Lenticular projectors inside traditional parabolic headlights to transform them into genuine Xenon headlights

THE MEASUREMENTS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE TOGETHER WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlights to transform them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike the USA, this modification is not permitted for use on public roads under current Italian regulations and should only be performed on vehicles intended for private circuit / track use.

Highest Market Quality, essential for results that admit no compromises. With precision optics, the projector lenticular Mini H1 6.0 concentrates maximum light output directly below the beam cut-off, maximising long-range visual performance. The beam is wide, light distribution is precise, and visibility is maximised. With these projectors you will have the cleanest beam, without glare and annoying dazzle zones even for SUV owners.

Direct fit in the majority of headlights, extremely simple relative to the performance they produce, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is parabolic, they can be fitted but are not essential: for a parabolic headlight you can instead fit our specific Xenon conversion kit that will fit your reflector perfectly, projecting a powerful road beam. With our Specific Xenon kits you will achieve excellent results even on parabolic headlights for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlight shell or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a complete Retrofit of your headlight by installing a Bi-Xenon Lenticular projector inside, which will give you a perfect light beam, instantaneous dipped beam, and incomparable aesthetics. Thanks to the Retrofitting projectors it is also possible to equip the headlight with D2S lamps, allowing you to pair the best lamps on the market (Philips) with our best Xenon Ballasts, for unmatched performance even compared to original OEM Xenon headlights.

Installation instructions: Remove the headlight shells, insert the projector into the reflector by fixing it in the lamp housing hole and hand-tightening it with the supplied nut. Check the beam orientation, then fully tighten the nut and reseal the shells with the special Retrofitting silicone. Where necessary, only a minimal amount of cuts and modifications is required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to original factory Xenon projectors . Their wide, uniformly illuminated beam remains intense along the road to the outer edges. The Bi-Xenon main beam adds a considerable amount of extra light.

Each projector has been perfectly tested and calibrated to ensure you get only the best visual performance.

With the best online reputation for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a large-stock request, our technical staff is here to help!

Mini H1 Projector Features:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Closing ring: Hexagonal 27mm Anodised Aluminium
Reflector adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

Z113