Retrofit Lenticular HID Bi-Xenon Projector H1 H7 H4 - Z112

Retrofit Bi-Xenon Lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 POLLICI LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to transform them into true Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE ALONG WITH ALL THE DIMENSIONS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to turn them into real Xenon headlights, with performance literally on par with original factory units. Unlike in the USA, this modification is not permitted for use on public roads under current Italian regulations and should only be carried out on vehicles intended for private circuit/track use.

Top quality on the market, essential for results that accept no compromises. With a precision optic, the lenticular projector Mini H1 6.0 focuses maximum light output directly below the cutoff point of the beam, maximising long‑distance visual performance. The light beam is wide, the light distribution is precise, and visibility is maximised. With these projectors you will have the cleanest beam, without glare or annoying dazzle zones even for SUV owners.

Direct fit in most headlamps, extremely simple relative to the performance they deliver, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, it is possible to fit them, but it is not essential: on your parabolic headlamp you can in fact fit one of our specific Xenon conversion kits that will adapt perfectly to your parabola, projecting a powerful beam on the road. With our Specific Xenon kits you will achieve excellent results even on parabolic reflectors for halogen bulbs; the fitting is extremely simple and non‑invasive, and does not require opening the headlamp bowl or structural modifications.
- For tuning enthusiasts, more experienced users and those demanding a perfect result, you can achieve even more with a full Retrofit of your headlamp by installing a Bi-Xenon Lenticular projector inside it, which will give you a perfect light beam, instant high beam, and unmatched aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts for performance that rivals OEM Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the reflector fixing it in the lamp housing hole by screwing it in by hand with the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the covers with the special retrofitting silicone. Where necessary, only a very small amount of cuts and modifications are required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to original manufacturer Xenon projectors . Their wide, evenly illuminated beam stays strong down the road to the outer edges. The Bi‑Xenon high beam adds a lot of extra light.

Each projector has been perfectly tested and calibrated to ensure you only get the best visual performance.

With the best online reputation for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a request for large stocks, our technical staff is here to help!

Mini H1 Projector features:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Retaining ring: 27mm hexagonal anodised aluminium
Reflector adapters: Direct to H4, H7.
Lens: 2.5" Crystal Clear - Professional Clear Optic - Purity 99.7%

Z112