HID Lenticular Bi-Xenon Projector H1 H7 H4 Retrofit - Z104

Retrofit Bixenon Lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlights to transform them into true Xenon headlights

MEASUREMENTS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE TOGETHER WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlights to transform them into true Xenon headlights, with performance literally on par with original factory units. Unlike in the USA, this modification is not permitted for road use under current Italian regulations and should only be carried out on vehicles intended for private circuit/track use.

Top quality on the market, essential for results that allow no compromises. With precision optics, the Mini H1 6.0 lenticular projector concentrates maximum light output directly below the cutoff of the beam, maximising long-distance visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With the projectors you will have a very clean beam, without glare and annoying dazzle zones even for SUV owners.

Direct fit in the majority of headlights, extremely simple relative to the performance they produce, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is parabolic, they can be fitted but are not essential: for parabolic headlights it is possible to fit one of our specific Xenon conversion kits which will adapt perfectly to your parabola, projecting a powerful road beam. With our Specific Xenon kits you will achieve excellent results even on parabolic reflector headlights for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlamp housing or structural modifications..
- For tuning enthusiasts, more experienced users and those demanding a perfect result, even more can be achieved with a full retrofit of your headlight by installing a Bi-Xenon Lenticular projector inside, which will give you a perfect light beam, instant high beam, and unmatched aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for performance incomparable even with original OEM Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the reflector securing it in the lamp housing hole by hand-threading the supplied nut. Check the orientation of the beam, then fully tighten the nut and reseal the covers with the special Retrofitting silicone. Where necessary, only a minimal amount of cuts and modifications are required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to original manufacturer Xenon projectors . Their wide, evenly lit beam remains strong across the road up to the outer edges. The Bi-xenon high beam adds a lot of additional light.

Each projector has been perfectly tested and calibrated to ensure you only get the best visual performance.

With the best online reputation for unbeatable products, value for money and support service, it is trusted by tuning enthusiasts across Italy. Contact us today with your questions. Whether you need model advice, have a technical question or a bulk order request, our technical staff are here to help!

Mini H1 Projector specifications:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: 27mm hexagonal anodised aluminium
Reflector adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Clear Optics - Purity 99.7%

Z104