Projector Lens HID Bi-Xenon H1 H7 H4 Retrofit - Z102

Retrofit Bixenon Lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and an innovative dip-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to convert them into true Xenon headlights.

THE MEASUREMENTS ARE SHOWN IN THE PHOTOS ON THE WEBSITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 lamps. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to convert them into true Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian legislation and must only be carried out on vehicles intended for private circuit/track use.

Highest quality on the market, essential for results that allow no compromise. With a precision optic, the projector lens Mini H1 6.0 concentrates maximum luminous output directly below the cut-off of the light beam, maximising visual performance at long distance. The light beam is wide, the light distribution is precise, and visibility is maximised. With the projectors, you will have the cleanest beam, without glare or disturbing dazzle zones even for SUV owners.

Direct fitment in most headlamps, extremely simple relative to the performance they produce, make them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, they can be fitted, but are not essential: on your parabolic headlamp you can in fact fit one of our specific Xenon conversion kits which will adapt perfectly to your parabola, projecting a powerful light beam on the road. With our Specific Xenon kits you will achieve excellent results even on parabolic headlamps for halogen lamps; installation is extremely simple and non-invasive, and does not require opening the headlamp housing or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a full Retrofit of your headlamp, installing a Bi-Xenon Lenticular projector inside, which will allow you to obtain a perfect light beam, instant dip function, and unmatched aesthetics. Thanks to the Retrofitting projectors it is also possible to equip the headlamp with D2S lamps, allowing you to pair the best lamps on the market (Philips) with our best Xenon Ballasts, for unmatched performance even compared to OEM original Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the parabola fixing it in the lamp housing hole by screwing it in by hand with the supplied nut. Check the orientation of the light beam, then tighten the nut definitively and reseal the covers with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modification is required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to those of original factory Xenon projectors . Their wide, evenly illuminated light beam stays intense across the road to the outer edges. The Bixenon high beam adds a considerable amount of additional light.

Each projector has been tested and finely calibrated to ensure you receive only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a request for large stocks, our technical staff is here to help you!

Mini H1 Projector Features:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Retention ring: Hexagonal 27mm Anodised Aluminium
Parabola adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99,7%

Z102