Lenticular HID Bi-Xenon Retrofit Projector H1 H7 H4 - Z100

Retrofit Bixenon Lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 POLLICE LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlights to convert them into true Xenon headlights

THE MEASUREMENTS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlights to convert them into true Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian regulations and should only be carried out on vehicles intended for private circuit/track use.

Top Quality on the Market, essential for results that allow no compromises. With precision optics, the lenticular projector Mini H1 6.0 focuses the maximum light output directly below the cutoff line of the light beam, maximising long-distance visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With the projectors, you will have the cleanest beam, without glare and annoying dazzling zones even for SUV owners.

Direct installation in the majority of headlights, extremely simple relative to the performance they produce, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is parabolic, it is possible to fit them, but it is not essential: on your parabolic headlight you can in fact fit one of our specific Xenon conversion kits which will adapt perfectly to your parabola, projecting a powerful beam on the road. With our Specific Xenon kits you will obtain excellent results even on parabolic headlights for halogen bulbs; installation is extremely simple and non-invasive, and does not require opening the headlight housing or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a complete Retrofit of your headlight, installing a Bi-Xenon Lenticular projector inside, which will allow you to obtain a perfect light beam, instant high beam, and unrivalled aesthetics. Thanks to Retrofitting projectors it is also possible to equip the headlight with D2S bulbs, allowing you to combine the best bulbs on the market (Philips) with our best Xenon Ballasts, for unmatched performance even compared to original OEM Xenon headlights.

Installation instructions: Remove the headlight covers, insert the projector into the parabola fixing it in the lamp housing hole by screwing it in by hand with the supplied nut. Check the orientation of the light beam, then tighten the nut definitively and reseal the covers with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modifications may be required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to those of original Xenon projectors from the manufacturer. Their wide, evenly illuminated light beam stays intense all the way to the outer edges. The Bi-Xenon high beam adds a considerable amount of extra light.

Each projector has been perfectly tested and calibrated to ensure you only get the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts throughout Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a bulk stock request, our technical staff is here to help!

Mini H1 Projector Features:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Retaining ring: 27mm Hexagonal anodised Aluminium
Parabola adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optics - Purity 99.7%

Z100