Projector Lens HID Bi-Xenon H1 H7 H4 Retrofit - KINGB-KING KONG

Lenticular Bi-Xenon retrofit kit H7 H1 H4WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new, innovative high-beam system.

H1/H7/H42.5-INCH LENS

Retrofitting consists of installing lenticular Bi-Xenon projectors inside traditional parabolic headlamps to turn them into genuine Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ON THE WEBSITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Lenticular Bi-Xenon Projectors for Retrofitting with 2.5" optics for H1. Directly from the United States, Retrofitting consists of installing lenticular Bi-Xenon projectors inside traditional parabolic headlamps to turn them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian legislation and should only be carried out on vehicles intended for private circuit/track use.

Top Quality on the Market, essential for results that allow no compromises. With precision optics, the lenticular projector Mini H1 6.0 concentrates maximum light output directly below the cut-off of the beam, maximising long-distance visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With these projectors you get the cleanest beam possible, without glare or annoying dazzle zones even for SUV owners.

Direct fit in most headlamps, extremely simple relative to the performance they deliver, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, they can be fitted but are not essential: on a parabolic headlamp you can instead fit one of our specific Xenon conversion kits that will adapt perfectly to your reflector, projecting a powerful beam on the road. With our Specific Xenon kits you will achieve excellent results even on parabolic halogen reflectors; installation is extremely simple and non-invasive, and does not require opening the headlamp cap or structural modifications.
- For the tuning enthusiasts, more experienced users and those demanding a perfect result, you can get even more with a full retrofit of your headlamp by installing a lenticular Bi-Xenon projector inside, which will give you a perfect light beam, instantaneous high beam, and unrivalled aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlamp with D2S, allowing you to pair the best bulbs on the market (Philips) with our top Xenon ballasts, for performance unmatched even by OEM Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the reflector securing it in the lamp housing hole by hand-tightening the supplied nut. Check the beam orientation, then tighten the nut fully and reseal the covers with the special retrofitting silicone. Where necessary, a very small amount of cutting and modification may be required.

The Xenovision Mini lenticular Bi-Xenon projectors H1 will have performance literally identical to the vehicle manufacturer's original Xenon projectors. Their wide, evenly lit beam remains strong across the road all the way to the outer edges. The Bi-Xenon high beam adds a considerable amount of additional light.Each projector has been tested and perfectly calibrated to ensure you get only the best visual performance.

With the best online reputation for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or require large stock, our technical staff are here to help!

Mini Projector Features

Mini H1:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Closing ring: 27mm Hex in anodised aluminium27mm in anodised aluminium
Reflector adapters: Direct fit for H4, H7.
Lens: 2.5" Crystal Clear - Professional Clear Optic - 99.7% Purity

KINGB-KING KONG