Projector Lens HID Bi-Xenon H1 h7 h4 Retrofit - G262

Retrofit Bi-xenon lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new and innovative high beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional reflector headlights to convert them into true Xenon headlights

THE MEASUREMENTS ARE SHOWN IN THE PHOTOS ON THE SITE TOGETHER WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional reflector headlights to convert them into true Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian regulations and should only be carried out on vehicles intended for private circuit / track use.

Top Quality on the Market, indispensable for results that do not admit compromises. With precision optics, the lenticular projector Mini H1 6.0 concentrates maximum light output directly below the cutoff of the beam, maximising long-distance visual performance. The beam is wide, light distribution is precise, and visibility is maximised. With the projectors, you will have the cleanest beam, without glare and annoying dazzle zones even for SUV owners.

Direct installation in most headlights, extremely simple relative to the performance they produce, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is a reflector, it is possible to fit them, but it is not essential: on your reflector headlight you can in fact fit one of our specific Xenon conversion kits which will adapt perfectly to your reflector, projecting a powerful beam on the road. With our Specific Xenon kits you will achieve an excellent result even on reflector headlights for halogen bulbs, installation is extremely simple and non-invasive, and does not require opening the headlight shell or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can get even more with a complete Retrofit of your headlight, installing a Bi-Xenon Lenticular projector inside, which will allow you to obtain a perfect light beam, instant high beam, and unrivalled aesthetics. Thanks to Retrofitting projectors it is also possible to equip the headlight with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for unbeatable performance even compared to original OEM Xenon headlights.

Installation instructions: Remove the headlight shells, insert the projector into the reflector by securing it in the lamp housing hole by hand-tightening the supplied nut. Check the orientation of the beam, then tighten the nut definitively and reseal the shells with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modifications is required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to those of original manufacturer Xenon projectors . Their wide, evenly illuminated light beam stays strong all the way to the outer edges. The Bi-xenon high beam adds a lot of additional light.

Each projector has been tested and calibrated to perfection to ensure you have only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts throughout Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a request for large stocks, our technical staff is here to help you!

Mini H1 Projector Features:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: Hexagonal 27mm Anodised Aluminium
Reflector adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optics - Purity 99.7%

G262