Projection Lens HID Bi-Xenon H1 h7 h4 Retrofit - G261

Retrofit Bi-Xenon Lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve lighting depth and a new innovative high beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to transform them into true Xenon headlights

THE DIMENSIONS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE TOGETHER WITH ALL THE DIMENSIONS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to transform them into true Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for road use under current Italian regulations and should only be carried out on vehicles intended for private circuit / track use.

Top Quality on the Market, essential for results that admit no compromises. With precision optics, the Mini H1 6.0 lenticular projector concentrates maximum light output directly below the beam cut-off, maximising long-range visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With these projectors you will have the cleanest beam possible, without glare or annoying dazzle zones even for SUV owners.

Direct fit in most headlamps, extremely simple relative to the performance they produce, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, they can be fitted, but are not essential: on your parabolic headlamp you can instead fit one of our specific Xenon conversion kits which will adapt perfectly to your parabola, projecting a powerful light beam on the road. With our Specific Xenon kits you will achieve excellent results even on parabolic halogen headlamps; installation is extremely simple and non-invasive, and does not require opening the headlamp cover or structural modifications..
- For tuning enthusiasts, more experienced users and those demanding a perfect result, you can achieve even more with a complete retrofit of your headlamp by installing a Bi-Xenon Lenticular projector inside, which will give you a perfect light beam, instant high beam, and unrivalled aesthetics. Thanks to retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our top Xenon Ballasts, for unmatched performance even compared with OEM original Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the parabola fixing it in the lamp housing hole by hand-threading the supplied nut. Check the orientation of the light beam, then tighten the nut definitively and reseal the covers with the special Retrofitting silicone. Where necessary, only a very small amount of cutting and modification is required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to original manufacturer Xenon projectors. Their wide, evenly illuminated beam remains intense all the way to the outer edges. The Bi-Xenon high beam adds a considerable amount of extra light.

Each projector has been tested and perfectly calibrated to ensure you get only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and support service, it is trusted by tuning enthusiasts across Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a large stock request, our technical staff is here to help you!

Mini H1 Projector Features:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Closing ring: 27mm hex aluminium anodised
Parabola adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Clear Optic - Purity 99.7%

G261