Lenticular HID Bi-Xenon Projector H1 H7 H4 Retrofit - TO CHOOSE

Retrofit Bi-xenon lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to turn them into genuine Xenon headlights

THE MEASUREMENTS ARE SHOWN IN THE PHOTOS ATTACHED ON THE SITE ALONG WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to turn them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian regulations and must be carried out only on vehicles intended for private circuit / track use.

Top Quality on the Market, essential for results that admit no compromise. With a precision optic, the lenticular projector Mini H1 6.0 concentrates maximum light output directly below the beam cut-off, maximising long-distance visual performance. The light beam is wide, the light distribution is precise, and visibility is maximised. With the projectors, you will have the cleanest beam, without glare and troublesome dazzle zones even for SUV owners.

Direct installation in most headlamps, extremely simple considering the performance they deliver, makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, they can be fitted, but are not essential: on your parabolic headlamp you can in fact fit one of our specific Xenon conversion kits which will adapt perfectly to your parabola, projecting a powerful beam on the road. With our Specific Xenon kits you will achieve excellent results even on parabolic halogen headlamps; installation is extremely simple and non-invasive, and does not require opening the headlamp shell or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a complete Retrofit of your headlamp, installing inside a Bi-Xenon Lenticular projector, which will allow you to obtain a perfect light beam, an instant high beam, and unparalleled aesthetics. Thanks to Retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to match the best bulbs on the market (Philips) with our best Xenon Ballasts, for unbeatable performance even compared to OEM original Xenon headlights.

Installation instructions: Remove the headlamp shells, insert the projector into the parabola securing it in the lamp housing hole by hand-threading the supplied nut. Check the orientation of the light beam, then tighten the nut definitively and reseal the shells with the special Retrofitting silicone. Where necessary, only a small amount of cuts and modifications is required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will deliver performance literally identical to original factory Xenon projectors . Their wide, evenly lit beam remains intense across the road all the way to the outer edges. The Bi-Xenon high beam adds a lot of extra light.

Each projector has been perfectly tested and calibrated to ensure you have only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and after-sales service, it is trusted by tuning enthusiasts throughout Italy. We invite you to contact us today with your questions. Whether you need model advice, have a technical question or a large stock request, our technical staff is here to help!

Mini H1 Projector Features:
Structure: Mini H1 6.0 Bi-Xenon (Pair)
Closure ring: 27mm Hexagonal in Anodised Aluminium
Parabola adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

TO CHOOSE