Lenticular HID Bi-Xenon Mini Projector H1 H7 H4 Retrofit - COV3 LED INTEGRATED

H7 H1 H4 Lenticular Bixenon retrofit kit WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to convert them into true Xenon headlights

THE MEASUREMENTS ARE SHOWN IN THE PHOTOS ON THE WEBSITE ALONG WITH ALL MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 lamps. Directly from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlamps to convert them into true Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for use on public roads under current Italian regulations and should only be carried out on vehicles intended for private circuit/track use.

Top quality on the market, essential for results that admit no compromise. With precision optics, the lenticular projector Mini H1 6.0 concentrates maximum light output directly below the beam cut-off, maximising long-range visual performance. The beam is wide, light distribution is precise, and visibility is maximised. With these projectors you will have a very clean beam, without scatter and annoying glare zones even for SUV owners.

Direct fit in most headlamps; extremely simple installation relative to the performance they deliver makes them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, it is possible to fit them, but it is not essential: on your parabolic headlamp you can instead fit one of our specific Xenon conversion kits which will adapt perfectly to your parabola, projecting a powerful beam on the road. With our Specific Xenon kits you will achieve excellent results even on parabolic halogen headlamps; installation is extremely simple and non-invasive, and does not require opening the headlamp housing or structural modifications..
- For tuning enthusiasts, more experienced users and those demanding a perfect result, even more can be achieved with a full Retrofit of your headlamp by installing a Bi-Xenon Lenticular projector inside, which will give you a perfect light beam, instant high beam, and unmatched aesthetics. Thanks to the Retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for performance that rivals OEM Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the parabola securing it in the lamp housing hole by hand-tightening with the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the covers with the special Retrofitting silicone. Where necessary, only a very small amount of cutting and modifications is required.

The Xenovision Mini H1 Bi-Xenon Lenticular projectors will have performance literally identical to original factory Xenon projectors from the manufacturer. Their wide, uniformly illuminated light beam stays intense all the way to the outer edges. The Bixenon high beam adds a considerable amount of extra light.

Each projector has been tested and calibrated perfectly to ensure you only have the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts across Italy. Contact us today with your questions. Whether you need advice on the model, have a technical question or a bulk order request, our technical staff is here to help!

Mini H1 Projector features:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Locking ring: 27mm Hexagonal anodised Aluminium
Parabola adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optic - Purity 99.7%

COV3 LED INTEGRATED