Lenticular HID Bi-Xenon Mini Projector H1 H7 H4 Retrofit - 2433-TIGUAN LED INTEGRATO

Retrofit Lenticular Bi-Xenon kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dipped-beam system.

H1/H7/H4 2,5 INCH LENS

Retrofitting consists of installing Lenticular Bi-Xenon projectors inside traditional parabolic headlamps to convert them into genuine Xenon headlights

MEASUREMENTS ARE SHOWN IN THE PHOTOS ON THE SITE TOGETHER WITH ALL THE DIMENSIONS OF THE DIFFERENT COVERS.

THE LENS FROM THE BASE WHERE IT SITS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Lenticular Bi-Xenon Projectors for Retrofitting with 2.5" optics for H1 bulbs. Directly from the United States, retrofitting consists of installing Lenticular Bi-Xenon projectors inside traditional parabolic headlamps to convert them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike the USA, this modification is not permitted for road use under current Italian regulations and should only be carried out on vehicles intended for private circuit / track use.

Maximum quality on the market, essential for results that allow no compromises. With precision optics, the Mini H1 6.0 lenticular projector concentrates maximum light output directly below the beam cut-off, maximising long-range visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With these projectors, you will have a very clean beam, without glare or annoying dazzle zones even for SUV owners.

Direct fit in the majority of headlamps, extremely simple relative to the performance they deliver, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is parabolic, they can be fitted but are not essential: for a parabolic headlamp you can fit our specific Xenon conversion kit which will adapt perfectly to your parabola, projecting a powerful beam on the road. With our Specific Xenon kits you will achieve excellent results even on parabolic halogen headlamps; installation is extremely simple and non-invasive, and does not require opening the headlamp cover or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, even more can be achieved with a complete retrofit of your headlamp by installing a Lenticular Bi-Xenon projector inside, which will give you a perfect light beam, instant dipped-to-main beam, and unmatched aesthetics. Thanks to the retrofitting projectors it is also possible to equip the headlamp with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts for performance that can rival OEM original Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the parabola securing it in the lamp housing hole by hand-threading the supplied nut. Check the beam orientation, then tighten the nut definitively and reseal the covers with the special retrofitting silicone. Where necessary, only a very small amount of cutting and modification is required.

The Xenovision Mini H1 Lenticular Bi-Xenon projectors will have performance literally identical to original manufacturer Xenon projectors . Their broad, evenly illuminated beam remains strong all the way to the outer edges. The Bi-Xenon main beam adds a considerable amount of additional light.

Each projector has been perfectly tested and calibrated to ensure you get only the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and after-sales service, it is trusted by tuning enthusiasts throughout Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a request for large stock, our technical staff is here to help!

Mini H1 Projector Specifications:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Retention ring: 27mm Hexagonal anodised Aluminium
Parabola adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Clear Optic - Purity 99.7%

2433-TIGUAN LED INTEGRATO