Projector Lens HID Bi-Xenon H1 h7 h4 Retrofit - 2430-LAND ROVER LED INTEGRATO

Retrofit Bixenon Lenticular kit H7 H1 H4 WITH WIRING (Without Ballasts)

A BI-XENON LENTICULAR PROJECTOR KIT with a new design to improve illumination depth and a new innovative dip-beam system.

H1/H7/H4 2,5 POLLICI LENS

Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlights to turn them into true Xenon headlights

THE MEASUREMENTS ARE SHOWN IN THE PHOTOS ON THE SITE TOGETHER WITH ALL THE MEASUREMENTS OF THE DIFFERENT COVERS.

THE LENTICULAR FROM THE BASE WHERE IT RESTS TO THE TIP OF THE LENS IS ALMOST 12CM.

Pair of Bi-Xenon Lenticular Projectors for Retrofitting with 2.5" optics for H1 bulbs. Direct from the United States, Retrofitting consists of installing Bi-Xenon Lenticular projectors inside traditional parabolic headlights to turn them into genuine Xenon headlights, with performance literally on par with factory originals. Unlike in the USA, this modification is not permitted for public road use under current Italian regulations and should be carried out only on vehicles intended for private track/circuit use.

Top quality on the market, essential for results that do not admit compromise. With precision optics, the Mini H1 6.0 lenticular projector concentrates maximum luminous output directly below the cut-off line of the beam, maximising long-range visual performance. The beam is wide, the light distribution is precise, and visibility is maximised. With these projectors you will have the cleanest beam, without glare or annoying dazzle zones even for SUV owners.

Direct fit in most headlights, extremely simple relative to the performance they produce, making them the most popular product for Xenon retrofitting.

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is parabolic, they can be fitted but are not essential: for a parabolic headlight you can fit one of our specific Xenon conversion kits which will adapt perfectly to your reflector, projecting a powerful road beam. With our Specific Xenon kits you will achieve an excellent result even on parabolic halogen headlights; installation is extremely simple and non-invasive, and does not require opening the headlamp housing or structural modifications.
- For tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a full Retrofit of your headlight by installing a Bi-Xenon Lenticular projector inside, which will give you a perfect light beam, instant dip, and unparalleled aesthetics. With retrofitting projectors it is also possible to equip the headlight with D2S bulbs, allowing you to pair the best bulbs on the market (Philips) with our best Xenon Ballasts, for performance unmatched even compared to OEM original Xenon headlights.

Installation instructions: Remove the headlamp covers, insert the projector into the reflector securing it in the lamp mounting hole by hand-tightening the supplied nut. Check the beam orientation, then fully tighten the nut and reseal the covers with the special Retrofitting silicone. Where necessary, only a minimal amount of cuts and modifications are required.

The Xenovision Mini H1 Lenticular Bi-Xenon projectors will have performance literally identical to the manufacturer's original Xenon projectors . Their wide, evenly illuminated beam stays intense across the road to the outer edges. The Bi-Xenon high beam adds a considerable amount of additional light.

Each projector has been perfectly tested and calibrated to ensure you only get the best visual performance.

With the best reputation on the Internet for unbeatable products, value for money and customer service, it is trusted by tuning enthusiasts throughout Italy. We invite you to contact us today with your questions. Whether you need advice on the model, have a technical question or a request for large stocks, our technical staff is here to help!

Mini H1 Projector Features:
Construction: Mini H1 6.0 Bi-Xenon (Pair)
Retention ring: 27mm Hexagonal in anodised Aluminium
Reflector adapters: Direct for H4, H7.
Lens: 2.5" Crystal Clear - Professional Transparent Optics - Purity 99.7%

2430-LAND ROVER LED INTEGRATO