LENTICOLARE 2 POLLICI BIXENON H1 H7 H4 AE02

1,Installing this LENTICULAR KIT is not straightforward. It is not a plug & play job: you must first remove the headlight, then dissolve the silicone to remove the headlight glass and only then continue with the installation. After completing the assembly, everything must be re-siliconed and reassembled.
2, This lenticular kit does not include the 2 control units; you must purchase the control units separately.

-24 Month Warranty-

PRODUCT DESCRIPTION
With this kit you can achieve the same effect as factory lenticular headlights fitted to BMWs with angel eyes for the position lights, creating a beautiful effect.
This lenticular xenon has an intelligent, revolutionary system. It contains a single lamp inside that can create a BiXenon effect (project ELLA) thanks to an electromagnetic panel. The lamp is fixed; the panel is controlled by the high beam. When the high beam is activated the panel drops down to increase illumination depth and produce the high-beam effect; when switched back to low beam the panel returns up, partially covering the xenon lamp and restoring the low-beam effect.

ATTENTION
1, The H7, H1 and H4 lenticular kits share the same lens and dimensions; only the mounting support differs. Therefore H7 and H1 use the same model: removing the H7 support converts it into an H1 lenticular kit, whereas H4 has its own H4-specific support.
2, The internal xenon lamp of the lenticular is a special lamp — actually just a bulb without any connector. Therefore the replacement xenon lamp for the lenticular is the same for all three models H7, H1 and H4.