AOZOOM 2 inch PAIR OF LENS PROJECTORS to assemble mini h1

PAIR OF 1.8-inch LENTICULAR PROJECTORS TO ASSEMBLEH7 H1 H4 

To complete the installation a relay is requiredh4, a xenon kit with H1 lamph1 or an H1 LED kith1 and a pair of covers chosen from those available in the dedicated category

Optional fitting of angel eyes to be assessed in size and type depending on the chosen cover

3 YEARS WARRANTY

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is a reflector type, they can be fitted but are not essential: on your reflector headlight you can instead fit one of our specific Xenon or LED conversion kits which will adapt perfectly to your reflector, projecting a powerful beam onto the road. With our specific Xenon or LED kits you will achieve excellent results even on reflector headlights designed for halogen bulbs; installation is extremely simple and non‑invasive and does not require opening the headlight housing or making structural modifications.
- For thetuning enthusiasts, more experienced users and those who demand aperfect result, you can achieve even more with a full retrofit of your headlight by installing a Bi‑Xenon Lenticular projector inside, which will give you a perfect light beam, instant dip/high beam and an unrivalled aesthetic.

Installation instructions: Remove the headlamp covers, insert the projector into the reflector by securing it in the lamp housing hole by hand‑threading the supplied nut. Check the beam orientation, then tighten the nut definitively and seal the covers with the special Retrofitting silicone. Where necessary, a very small amount of cutting and modification may be required.