AOZOOM PAIR OF LENTICULAR PROJECTORS to assemble 2,5 INCH

PAIR OF 2.5'' LENTICULAR PROJECTORS TO ASSEMBLEH7 H1 H4 

To complete the installation a relay is requiredh4, a xenon kit with H1 bulbh1 or an H1 LED kith1 and a pair of covers chosen from those available in the dedicated category

Optional: the addition of angel eyes, to be evaluated in size and type depending on the chosen cover

3 YEARS WARRANTY

What are these projectors for? Do I need them?
- If your headlamp is already lenticular, you do not need them.
- If your headlamp is a reflector type, they can be fitted but are not essential: for a reflector headlamp you can fit one of our specific Xenon or LED conversion kits that will adapt perfectly to your reflector, projecting a powerful beam onto the road. With our specific Xenon or LED kits you will achieve excellent results even on reflector headlamps with halogen bulbs; the installation is extremely simple and non-invasive and does not require opening the headlamp housing or making structural modifications.
- For thetuning enthusiasts, more experienced users and those demanding aperfect result, you can achieve even more with a full retrofit of your headlamp by installing a Bi-Xenon Lenticular projector inside, which will give you a perfect light beam, instant high beam and unrivalled aesthetics.

Installation instructions: Remove the headlamp housings, insert the projector into the reflector by securing it in the lamp mounting hole and hand-tightening with the supplied nut. Check the beam orientation, then tighten the nut fully and seal the housings with the special retrofitting silicone. Where necessary, a very small amount of cutting or modification may be required.