AOZOOM PAIR OF 2,5-INCH LENTICULAR PROJECTORS TO ASSEMBLE SILVER

PAIR OF 2.5 INCH LENTICULAR PROJECTORS TO ASSEMBLE SILVER H7 H1 H4 

To complete the installation a relay is required h4, a xenon kit with an H1 bulb h1 or an H1 LED kit h1 and a pair of covers of your choice from those available in the dedicated category

Optional: the addition of angel eyes, to be assessed in size and type depending on the cover chosen

3 YEARS WARRANTY

What are these projectors for? Do I need them?
- If your headlight is already lenticular, you do not need them.
- If your headlight is a reflector type, they can be fitted but are not essential: on a reflector headlight you can fit one of our specific Xenon or LED conversion kits that will adapt perfectly to your reflector, projecting a powerful beam onto the road. With our specific Xenon or LED kits you will achieve excellent results even on reflector headlights designed for halogen bulbs; the installation is extremely simple and non-invasive and does not require opening the headlight housing or making structural modifications.
- For the tuning enthusiasts, more experienced users and those who demand a perfect result, you can achieve even more with a complete retrofit of your headlight by installing a Bi-Xenon lenticular projector inside, which will provide a perfect light beam, instant high beam and an unrivalled aesthetic.

Installation instructions: Remove the headlight covers, insert the projector into the reflector by fastening it in the lamp recess and hand-tightening the supplied nut. Check the orientation of the light beam, then fully tighten the nut and seal the covers with the special retrofitting silicone. Where necessary, a very small amount of cutting and modification may be required.