Aozoom pair 3.0-inch Q5 Bi-Xenon projector lenses D1S D3S

AOZOOM PAIR HIGH-QUALITY 3.0-INCH Q5 BI-XENON PROJECTOR LENSES D1S D2S D3S

Q5 3-INCH LENS D1S D3S AOZOOM TOP QUALITY PROJECTOR

3 YEARS WARRANTY 3 YEARS WARRANTY

What's the secret?

Once again, like other bi-xenon projectors on the market, the Aozoom D1S D3S can produce both high and low beams. Their lateral pole solenoid mechanism creates a reliable high beam and low beam. And the fully die-cast straight screen makes the light output very consistent. The low-beam light pattern of this projector is engineered with advanced optics and a hotspot system and will create a wide beam pattern with uniform light distribution, cutting through the darkness at night like a laser. The cutoff line is sharp, clean and full of bright colour shimmer. For the high beam, there is plenty of reserved light to use here to penetrate for hundreds of metres at night.

What about colour?

The Aozoom D1S D2S D3S bi-xenon projector is compatible with 35W, 45W, 55W HID kits with 3000K 4300K, 5000K, 5500K, 6000K, 8000K bulbs.

Installation summary

The Aozoom D1S D3S bi-xenon projector lens has a threaded mounting stem on the rear for those who want something fairly easy to install. On an H4 projector reflector as an example ... Remove the headlight lens, position the threaded mounting stem with the pre-existing hole in the rear of the reflector, add the alignment plate, tighten the locking ring, and re-fit the lamp - select the headlights. For other applications for H1, H7, H11, H13, 9005, 9006, 9007 headlamp housings, a minimal cut will probably be required, but the results are worth it!

Compatibility

The D1S D3S bi-xenon projector is only compatible with the D1S D3S HID bulb as it inherits the basic Hella 5G structure for replacing many older OEM Hella 5G housings that use these designs.

If you are looking for a projector compatible with D1S D2S D3S D4S, you can choose our RTX projector lens.

Dimensions

• Depth: 140mm
• Width: 112mm
• Height: 95mm
• Lens diameter: 3 pollici
• Mounting stem: diameter 25mm

What's included?

• 2 PCS 3.0 '' Metal Bi-xenon projector, each piece is sold with its own box;
• 2 PCS Locking rings, bulb caps, etc
• 2 PCS Solenoid inputs