Full LED Kit HIR2 9012 for Lenticular Low and High Beam Definitive

New kit full LED HIR2 9012  definitive lenticular solution for lighting problems on lenticular headlamps.

All modern vehicles as well as older cars are fitted with headlamps that do not have an open reflective bowl but a lens. The lens evens out the light beam, making it wider and more defined, but they retain the majority of the light emitted by the halogen bulb.

Our LED lights for lenticular headlamps increase the illumination power of your headlamp by 400% thanks to LEDs positioned on a single side of the unit, thus ensuring a greater concentration of light precisely where it is needed.

The lamp HIR2 9012LED built and designed by our company has a system CANBUS integrated that adapts to any type of vehicle and guarantees both lateral and depth visibility. We have created a bulb HIR2 9012 with dual-focus of the LED which allows a perfect lateral illumination and a greater depth in the central area.

The product is Plug & Play does not require additional resistors and is installed with a few simple steps. Thanks to an innovative design the installation can be carried out without the assistance of specialised technicians. If during installation there are doubts or problems you have direct telephone access to our technicians who will provide real-time assistance. In addition we have a network of around 9000 professionals who collaborate with us across Italy, where it is possible at any time to go to have your purchase installed and put immediately into service.

Lamps HIR2 9012 with an aluminium heatsink, cooling fan and intelligent protection system against short circuits or excessive heating.Attention to those who promise you the so-called 19,000 lumens or even more. Considering that the maximum a LED can produce is between 65 and 155 lumens per watt, it is impossible that a normal lamp between the 20w to the 40w will not be able to reach at most between the 1200 and the 6000lm as theoretical power.

All our lamps LED HIR2 9012 are tested with specific equipment and the LED chip is manufactured and customised directly by our company to avoid false values that would make the sale of the product untruthful and illegal.

Useful Information and Technical Specifications:

Voltage: DC 12V and DC 24V;

Fitting type: HIR2 9012 

Nominal power: 53W (LED CUSTOMISED BY XENONPERTUTTI)

Actual power consumption: approximately 53W per lamp (draws approximately 4.41A at DC12V and 2,2A at DC24V);

Brightness: 8000 Lumens REAL Beware of those who provide false values.

LED colour: Ice White (approximately 6000K);

Composed of 2 LED lamps + 2 LED drivers

Full CANBUS: YES