HIR2 9012 LED Bulbs 5500k 7S SHORT Canbus XHP-50 35W

The increase in brightness, +190% in lumens compared with a halogen, is a parameter calculated with REAL data using an ULBRICHT sphere.

Replacing HIR2 (9012) lamps with LEDs is an increasingly common modification, especially because HIR2 halogens are known to be rather expensive and not always very bright in terms of luminous performance.

Here are the main reasons worth making the technological leap:

1. Visibility and Safety

• HIR2 halogens emit a warm light (about 3000K-3500K) that tends toward yellow. LEDs usually offer an ice-white light (6000K).
• High contrast: White light reflects road signs and lane edges better.
• Depth: A good LED kit increases beam depth, allowing you to react earlier to obstacles.

2. Energy Efficiency and Heat

• Halogen lamps work by heating a filament, dissipating much of the energy as heat.
• Reduced consumption: LEDs consume about 50-70% less energy, putting less strain on the alternator and battery.
• Cool on the headlamp: Because heat is dissipated at the rear of the lamp (via fans or heatsinks), the inner reflector is not at risk of yellowing or opacifying prematurely due to high temperatures.

3. Longevity

• If an HIR2 halogen has an average life of about 500-1.000 hours, a quality LED can exceed 30.000 hours. In practice, once installed, you might never have to change them again for the life of the car.

4. Modern Aesthetics

• Let's be honest: yellow light looks "old car". LEDs give the vehicle a much more modern and premium look, similar to that of the latest models that already come with Full LED headlights as standard.